Signal Processing Systems : Extenders & Repeaters : Wyrestorm Technologies - EX-100-H2-PRO

18Gbps HDBaseT™ 2.0 5-Play Extender with DSC & USB2.0 Extension

Model: EX-100-H2-PRO

Point-to-point HDBaseT Extender supporting:
Content up to 4K/60 4:4:4 & RGB 8-bit
The latest HDR standards, including HDR-10, HLG and Dolby Vision at 30Hz
HDCP 2.2 encryption technology ensuring compatibility with the latest 4K UHD content and sources
HD Multichannel audio up to DTS:X and Dolby Atmos to all outputs

Compare

Project List

Product Info

Utilizing the best in HDBaseT technology, the EX-100-H2-PRO uses the powerful 2.0 chipset for 5-Play functionality: 4K HDMI, USB, Ethernet, Control and Power over 100m/328ft of Cat 6 cable. Using DSC (Display Stream Compression) this extender can support HDMI video up to 2160p 4:4:4 at 60Hz (18Gbps) without any visual loss in quality or latency. With HID’s and data transfer in mind, this extender supports USB 2.0 devices at up to 480Mbps, catering for powerful webcams, smart whiteboards and flash drives alike. Also included is a dedicated 2-way audio lane for transmission of analog stereo audio signals from TX-RX and RX-TX

Point-to-point HDBaseT Extender supporting:
Content up to 4K/60 4:4:4 & RGB 8-bit
The latest HDR standards, including HDR-10, HLG and Dolby Vision at 30Hz
HDCP 2.2 encryption technology ensuring compatibility with the latest 4K UHD content and sources
HD Multichannel audio up to DTS:X and Dolby Atmos to all outputs
Extends 2160p 4:4:4 or 4:2:2 12-bit HDR content from a source to a display or projector using HDBaseT up to 100m/328ft
Automatically activated DSC lossless compression handles HDMI content up to 17.8Gbps
HDMI Input and HDMI output supports bandwidths of up to 18Gbps
Compatible with DVI-I and DP++ v1.3 signals from compatible devices
Bidirectional USB 2.0 passthrough offering 480Mbps transfer and HID extension, with host and 4 device ports on both TX and RX
10/100 Ethernet port on both ends for extension of LAN to TX or RX
Bidirectional audio lane separate to HDMI signal sends and receives analog audio signals at either end
Bidirectional IR, RS-232 and CEC communication
DIP Switch selection for direction of USB control, long cable mode and firmware update
Backwards compatible with HDBaseT 1.0 transmission and receiving devices (lowest denominator takes priority)
LED indication for power supply to units, signal status to show established display connection, HDCP presence in signal and transmission link
1-way PoH (Power over HDBaseT) enables the receiver to be remotely powered by the transmitter
Locking DC power jacks
12v DC PSU with US, UK, EU & AU Power cables included
Mounting brackets included