Interpreter Control Console

Model: IC-2

New CAT 5 audio offers simplified cabling and easy cascading to support additional interpreters.
Built-in distribution amplifier and mini mixer reduce the need for external equipment and greatly simplify setup.
Floor language feed-through
Interlocking microphone and relay output functions
Enhanced flexibility, providing each interpreter with multiple microphone and headset options

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Accessories

Videos

The Williams Sound IC-2 is an audio control center for simultaneous interpretation of one or more languages. As a stand-alone unit, it allows one or two interpreters to monitor floor or relay sources, activate microphone inputs, and route the interpretation signal to one of two language groups. Ideal for presentation-style conferences of up to 14 languages, where a floor and a single relay language are used. Can be used with Williams Sound FM, infrared and Digi-Wave™ transmitters for portable or fixed installations. Designed to meet international standards for portable interpretation consoles.

New CAT 5 audio offers simplified cabling and easy cascading to support additional interpreters.
Built-in distribution amplifier and mini mixer reduce the need for external equipment and greatly simplify setup.
Floor language feed-through
Interlocking microphone and relay output functions
Enhanced flexibility, providing each interpreter with multiple microphone and headset options
Five-year warranty
System Includes
- (1) IC-2 interpreter control console
- (1) WCA 091 25’ CAT 5 cable
- (1) TFP 044 power supply

ROHS Compliant - Yes
Warranty - Yes
Spec Sheet available - Yes

Color: Black and silver
Warranty (Length/Type): 5 Years
Depth: 6.35 in
Height: 2.45 in
Width: 10 in
Product Weight: 3.40 lbs
Certifications: CE, FCC, C-Tick, CB
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 110 Volts
Current Draw: 1 Amps
DC Voltage: 18 Volts
Inputs /Outputs:
- Floor In: 3-pin XLR female jack, balanced (or unbalanced) input with 24k ohms differential input impedance, max balanced input is +19dBu
- IC-2 Bus In/Out: CAT5 8p8c RJ45 female receptacle, distributes balanced line level Floor and Relay audio to another IC-2
- XLR Microphone Inputs: 3-pin XLR female jack, balanced (or unbalanced) input, Switchable 12VDC simplex power, Variable gain of 58 dB, 2.4k ohms balanced input impedance, maximum balanced input is +19dBu
- 3.5mm Microphone Inputs: Stereo 3.5 mm TRS phone jack, pink, and stereo 3.5mm TRRS phone jack, black, unbalanced (r, s) for electret condenser mics, variable gain of 40dB, Bias is 3.7VDC through 2.7k ohms
- 3.5mm TRRS Headphone Output: 3.5mm TRRS phone jack, Tip = Left, Ring 1 = Right, Ring 2 = GND, Sleeve = Mic. 40mW max power into 32 ohms stereo headset
- 3.5mm Headphone Output: 3.5mm TRS phone jack, mono or stereo headphone, 8 ohms minimum. 190mW max power into 32 ohms stereo headset
- Norm Out, Relay Out: 3-pin XLR male jack, balanced output, Max output is +19dBu into 600 ohms balanced load impedance
Controls:
- Volume: Left and Right rotary, controls headphone volume
- Bass and Treble Tone: Left and right rotary with center detent, controls headphone bass and treble tone levels
- Mute: Push button, backlit red, mutes left and right mics while pressed
- Mic On: Push button, backlit bright red, activates microphone, Right and left Mic On buttons are interlocked; mic can only be turned on if the other is off
- Floor Input, Relay Input: Push buttons, backlit blue, select listening language group, Listening modes are either/or: turning one on disables the other
- Relay Output: Push button, backlit yellow, selects microphone output language group: light on = Relay Out, light off = Norm Out
- Gain Adjust: Rotary gain pots control level of microphone and Floor audio
- Phantom Power: Slide switch enables 12VDC Simplex power to XLR microphone
- Norm Feedthrough: Slide switch enables Floor feedthrough to Norm Out XLR jack
- Relay Feedthrough: Slide switch enables Floor feedthrough to Relay Out XLR jack
- Ground Lift: Slide switch disconnects Chassis and Audio Grounds internal to the console
Indicator:
- Peak Level Indicator: Green LED on back panel indicates optimal audio output level on Norm Out XLR when blinking
- Relay Output in Use Indicator: Yellow LED on front panel indicates when Relay Output is in use
Audio Output:
- Frequency Response: 45Hz to 20kHz +0/-3dB re: 1kHz with flat bass/treble
- Distortion at 1kHz: <0.5 % at full power
- Signal to noise ratio: >82 dB (1kHz)
- Crosstalk Attenuation: >63 dB (1kHz)
- Tone Controls: Bass: +12dB Boost or -12dB Cut at 100Hz, Treble: +12dB Boost or -12dB Cut @ 10kHz

MIC 044 - Noise-Cancelling Headset Mic

MIC 068 - Heavy-duty dual-muff headset microphone

PPA T27 - Personal PA Base-station Transmitter

MCAT-091L-ic-2.pdf 306496 kb - Data Sheet

Project List

MAN-152-IC-2-REV-J.pdf 947924 kb - Instructions

Project List

TFP 044
Power supply for IC-2 and PLA 90

TFP 044
Power supply for IC-2 and PLA 90

WCA 104
XLR male to XLR female cable (10 ft)

WCA 104
XLR male to XLR female cable (10 ft)

WLC 004
AC main power cord, 3-pin (grounded), US main power cord, 0.60 lbs, Black, 7.5?, 18/3. IEC, CN.

WLC 004
AC main power cord, 3-pin (grounded), US main power cord, 0.60 lbs, Black, 7.5?, 18/3. IEC, CN.

What is an IC-2?

Project List

Williams Sound: IC-2 and Digi-Wave

Project List

Williams Sound: IC-2 and Digi-Wave

Project List

Williams Sound: Interpreter Control Console (IC-2)

Project List

Williams Sound: What is an IC-2?

Project List