Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Floor Pocket, 11 Gauge Steel Construction
Model: FP-2
- Constructed of 11 gauge steel, the FP-1 and FP-2 permit flush installation for safe, reliable connections
- Each unit incorporates a black carpet trim ring with a beveled edge.
- Two cable-clearance slots in the door allow it to close over cables when in use
- Interchangeable end panels are supplied with the FP-1 and FP-2
- One is solid metal which allows the user to punch or drill it to their own individual specifications
Compare
Project List
Product Info
Constructed of 11 gauge steel, the FP-1 and FP-2 permit flush installation for safe, reliable connections.
Dimensions for FP-2: 12" x 6" x 4".
Each unit incorporates a black carpet trim ring with a beveled edge.
Two cable-clearance slots in the door allow it to close over cables when in use.
Interchangeable end panels are supplied with the FP-1 and FP-2. One is solid metal which allows the user to punch or drill it to their own individual specifications. The other is pre-punched to accept four Whirlwind XLR or TRS jacks. The FP-1 has one interchangeable panel on one end, the FP-2 provides panels on both ends.
The bottom plates are also removeable to facilitate additional hole punching and connector mounting. Any or all of these may be ordered custom punched and/or loaded by Whirlwind.
The optional back boxes (FP-1BB, FP-1BB6, FP-2BB and FP-2BB6) have three sets of knockouts on each side.
The FP-1 and FP-2 are UL-listed and CSA approved.
Dimensions for FP-2: 12" x 6" x 4".
Each unit incorporates a black carpet trim ring with a beveled edge.
Two cable-clearance slots in the door allow it to close over cables when in use.
Interchangeable end panels are supplied with the FP-1 and FP-2. One is solid metal which allows the user to punch or drill it to their own individual specifications. The other is pre-punched to accept four Whirlwind XLR or TRS jacks. The FP-1 has one interchangeable panel on one end, the FP-2 provides panels on both ends.
The bottom plates are also removeable to facilitate additional hole punching and connector mounting. Any or all of these may be ordered custom punched and/or loaded by Whirlwind.
The optional back boxes (FP-1BB, FP-1BB6, FP-2BB and FP-2BB6) have three sets of knockouts on each side.
The FP-1 and FP-2 are UL-listed and CSA approved.
- Constructed of 11 gauge steel, the FP-1 and FP-2 permit flush installation for safe, reliable connections
- Each unit incorporates a black carpet trim ring with a beveled edge.
- Two cable-clearance slots in the door allow it to close over cables when in use
- Interchangeable end panels are supplied with the FP-1 and FP-2
- One is solid metal which allows the user to punch or drill it to their own individual specifications
- FP-1 has one interchangeable panel on one end, the FP-2 provides panels on both ends
- Bottom plates are also removeable to facilitate additional hole punching and connector mounting
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Avidex Industries, LLC
close
Avidex Industries, LLC
8509 154th Ave NE
Suite 100
Redmond, WA 98052
USA
(425)643-0330
www.avidex.com
Contact in regards to this product:
Whirlwind Music Distributors, Inc.
Model: FP-2
Request more information from a dealer near you
close
Request more information from a dealer near you