Power Supplies : Uninterruptable Power Supply - Battery Backups : Tripp Lite - SMART1000RM2U

SmartPro 120V 1kVA 800W Line-Interactive Sine Wave UPS, 2U Rack/Tower, Network Card Options, LCD, USB, DB9, 6 Outlets

Model: SMART1000RM2U

Tripp Lite SMART1000RM2U line interactive 2U rack/tower UPS with 1000VA / 1kVA / 800W capacity
Line interactive UPS with Automatic Voltage Regulation (AVR) corrects brownouts and overvoltages from 83 to 145V
NEMA 5-15P input plug; 6 NEMA 5-15R output receptacles, Two independently switchable output load banks
Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages
High 95% efficiency rating in line-power mode offers reduced power consumption and BTU emissions

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 95% line-mode efficiency offers reduced heat emissions and operating costs. Network management interfaces support communications via USB, RS-232 and optional SNMPWEBCARD network interface. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. Includes PowerAlert monitoring software and complete cabling. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.

Tripp Lite SMART1000RM2U line interactive 2U rack/tower UPS with 1000VA / 1kVA / 800W capacity
Line interactive UPS with Automatic Voltage Regulation (AVR) corrects brownouts and overvoltages from 83 to 145V
NEMA 5-15P input plug; 6 NEMA 5-15R output receptacles, Two independently switchable output load banks
Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages
High 95% efficiency rating in line-power mode offers reduced power consumption and BTU emissions
Internal batteries offer 15 minutes at 50% load (400W) and 5.3 minutes at 100% load (800W)
Hot-swappable, user-replaceable internal batteries can be replaced with no disruption to connected equipment
Front panel LCD monitoring screen with MODE and ENTER buttons reports operating mode with 5-bar battery charge graphic, plus 7 selectable screens of detailed UPS and site power information
LCD interface also supports a number of advanced user setup and operating preferences
Ships with 4 post rackmount installation hardware; Optional 2POSTRMKITWM enables 2 post rackmount/wallmount installation; Optional 2-9USTAND enables tower placement
Built-in USB, RS-232 and optional SNMPWEBCARD accessory monitoring options
HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
Included PowerAlert UPS monitoring software; Built-in Emergency Power Off (EPO) interface with cable
Package Includes SMART1000RM2U UPS System, PowerAlert software with USB, Serial & EPO cabling, 4 post rackmount installation kit, Instruction manual

Warranty - Yes
Rackmountable - Yes
UL Rated - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Cord Length (in/mm): 120 in
UL Rated: Yes
AC Voltage: 120 Volts
Active Power: 800 Watt
Current Draw: 9.20 Amps
DC Voltage: 24 Volts
Depth: 12.50 in
Height: 3.50 in
Width: 17.50 in
Product Weight: 35.40 lbs
Warranty (Length/Type): 2 Years
Rack Units (Height): 2U
utput Volt Amp Capacity: 1000 VA
Output kVA Capacity: 1 kVA
Output power factor: 0.8
Nominal Output Voltage(s) Supported: 120 V
Frequency Compatibility: 60 Hz
Output voltage regulation (line mode): -21%, +8%
Output voltage regulation (Battery mode): +/- 5%
Built-in UPS output receptacles: 6 5-15R outlet(s)
Built-in controllable switched load banks: Two switchable two-outlet 5-15R load banks
Output AC waveform (AC mode): Sine wave
Output AC waveform (battery mode): Pure Sine wave
UPS input connection type: 5-15P
Input circuit breaker: 15 A
Recommended Electrical Service: 15A 120V
Full Load Runtime: 5.3 min. (800w)
Half Load Runtime: 15 min. (400w)
Battery recharge rate (included batteries): Less than 4 hours from 10% to 90%
Voltage regulation description: Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 147
Overvoltage correction: Input voltages between 128 and 147 are reduced by 12%
Undervoltage correction: Input voltages between 83 and 107 are boosted by 14%
UPS AC suppression joule rating: 570
UPS AC suppression response time: Instantaneous
EMI / RFI AC noise suppression: Yes
Installation form factors supported with included accessories: 4 post 19 inch rackmount (mounting rail kit included)
Installation form factors supported with optional accessories: 2 post rackmount (2POSTRMKITWM); Wallmount (2POSTRMKITWM); Tower (2-9USTAND)
UPS Shipping dimensions (height x width x depth ): 9 x 24 x 20.2 inch
UPS housing material: Steel
Cooling Method: Fan
Storage Temperature Range: -15 to +50 °C
Relative Humidity: 0 to 95%, non-condensing
AC mode BTU / hr. (full load): 134
Transfer Time: 4 milliseconds (AC to battery), 2 milliseconds (Battery to AC)
Low voltage transfer to battery power (setpoint): 83
High voltage transfer to battery power (setpoint): 147
UPS Certifications: Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category B (EMI)
Product Warranty with Registration: 3 Years
RoHS: Yes
CISCO: Yes
Rackmountable: Yes