Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Dynamic Headset Microphone, Includes 3-pin Male XLR Connector w/ Detachable Belt Clip
Series: Shure
Model: WH20XLR
- Features a three-pin male XLR connector with a convenient detachable belt clip
- Lightweight wireframe and headband adjust for a secure, comfortable fit
- Extra-strong, small-diameter attached microphone cable resists breakage
- Collapsible microphone boom for easy storage and transportation
- Smooth, natural frequency response comparable to high-quality dynamic hand-held vocal microphones
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
The WH20 is a rugged, lightweight, dynamic wired headset microphone that provides high-quality voice pickup. It includes 3-pin male XLR connector w/ detachable belt clip. It fits securely for active microphone users, such as aerobics instructors and musicians, with low visibility for stage appearances. The cardioid (unidirectional) pickup pattern provides greater gain-before-feedback and isolation from ambient noise and other unwanted sound sources. A carefully shaped frequency response includes a voice-frequency presence peak and a low-frequency roll-off to compensate for the proximity effect inherent in cardioid mics during close-talk operation.
- Features a three-pin male XLR connector with a convenient detachable belt clip
- Lightweight wireframe and headband adjust for a secure, comfortable fit
- Extra-strong, small-diameter attached microphone cable resists breakage
- Collapsible microphone boom for easy storage and transportation
- Smooth, natural frequency response comparable to high-quality dynamic hand-held vocal microphones
- High input clipping level eliminates overload distortion
- Reliable at temperature and humidity extremes
- Supplied foam windscreen and clothing clip
- Polar/Pickup Pattern - Cardiod
- Microphone Type - Dynamic
- Headset Mic Type - Dynamic
- Microphone Connectivity - Wired
- Impedance: Microphone rating impedance is 150 ohms (200 ohms actual)
- Output Level (close-talked (At 12.5 mm (1/2 inch) at 1,000 Hz): Open Circuit Voltage –67.0 db/Pa (0.45 mV), (1 Pa = 94 dB SPL)
- Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 of microphone output XLR connector with wired microphone
- Storage Temperatures: -29 to 74 degrees C (-20 to 165 degrees F)
- Humidity: 0 to 95 %
- Cable Connector: Three-pin XLR with detachable belt clip
- Operating Temperature (Maximum): 140 F
- Operating Temperature (Minimum): 64.40 F
- Cable Length: 4 ft
- Maximum Frequency Response (Bandwidth): 15 kHz
- Maximum Frequency Response (Bandwidth): 15000 Hz
- Minimum Frequency Response (Bandwidth): 50 Hz
- Minimum Frequency Response (Bandwidth): 0.05 kHz
- Sensitivity: 38.40 dB
- Wireless: No
- Product Weight: 0.02 lbs
- Regulatory Compliance: CE
RK318WS
- Black Foam Windscreens and Clothing Clip for all WH10, WH20 Headworn Microphones
RK319
- Replacement Croakies Headset Band
RPM600
- Elastic Headband and Wire Frame, Black
WH20
- Dynamic Headset Microphone
WH20QTR
- Cardioid Headworn Dynamic Microphone with 1/4-inch Connector
WH20TQG
- Cardioid Headworn Dynamic Microphone with 4-Pin Mini Connector (TA4F)
User guide for Dynamic Headset Microphone
159 kb
- Instructions
Project List
Request Quote
Suggested Products
by
Sennheiser
Thank you!
Someone will be in touch with you shortly.
Contact Avidex Industries, LLC
close
Avidex Industries, LLC
8509 154th Ave NE
Suite 100
Redmond, WA 98052
USA
(425)643-0330
www.avidex.com
Contact in regards to this product:
Shure Incorporated
Model: WH20XLR
Request more information from a dealer near you
close
Request more information from a dealer near you