Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Unbalanced to Balanced Converter - 2 Channel
Series:
Model: FP-UBC2
- Stereo Unbalanced to Balanced Audio Conversion
- Connectorized Audio Converter
- Output Level Trim
- Low-Noise and Low-Distortion Conversion
- Cabinet, Shelf or Rack Mounting
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
Accessories
The FP-UBC2 is the ideal choice for connectorized conversion from unbalanced to balanced audio. This module features two identical channels. Gold-plated phono jacks are utilized for each unbalanced input channel. Each output is balanced, connected through an XLR jack. A gain trim potentiometer is provided for each channel. The normal gain setting is indicated for the trimming potentiometer. This setting produces a +4 dBu balanced output for a -10 dBV unbalanced input. The gain is adjustable -5 dB to +10 dB from the normal gain. Therefore, a +4 dBu output signal is possible from input signals ranging from -20 dBV to -5 dBV.
- Stereo Unbalanced to Balanced Audio Conversion
- Connectorized Audio Converter
- Output Level Trim
- Low-Noise and Low-Distortion Conversion
- Cabinet, Shelf or Rack Mounting
- Convenience of RDL FLAT-PAKs
- Converter Signal Types - Audio
- Converter Type - Other
- Noise: < -85 dB referred to +4 dBu (20 Hz to 20 kHz)
- Height: 1.29 in. 3.28 cm
- Width: 3.25 in. 8.26 cm
- Operating Temperature (Maximum): 131 F
- Operating Temperature (Minimum): 32 F
- Maximum Frequency Response (Bandwidth): 40 kHz
- Maximum Frequency Response (Bandwidth): 40000 Hz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Depth: 4.07 in
- Height: 1.29 in
- Width: 3.25 in
- Shipping Weight: 0.70 lbs
- Amps per FP-UBC2: 2 identical circuits (stereo or dual mono operation)
- Gain: -5 dB to +10 dB (adjustable relative to +4 dBu output for –10 dBV input); (separate controls for each channel)
- Input Level: -20 dBV to -5 dBV (for +4 dBu output)
- Input Impedance: 10 k Ohms
- Input Configuration: Unbalanced
- Output Impedance: 150 Ohms balanced, drives 600 Ohms or 10 k Ohms lines
- Output Configuration: Balanced or unbalanced
- IMD: < 0.02%
- Output Level: +4 dBu
- Headroom: > 18 dB (at rated output level of +4 dBu)
- Noise: < -85 dB referred to +4 dBu (20 Hz to 20 kHz)
- Crosstalk: Better than 70 dB (20 Hz to 20 kHz); < -80 dB (typ. 1 kHz)
- Power Requirement: GROUND-REFERENCED, 24 Vdc @ 50 mA
Datasheet for Unbalanced to Balanced Converter - 2 Channel
200695 kb
- Other
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Avidex Industries, LLC
close
Avidex Industries, LLC
8509 154th Ave NE
Suite 100
Redmond, WA 98052
USA
(425)643-0330
www.avidex.com
Contact in regards to this product:
Radio Design Labs
Model: FP-UBC2
Request more information from a dealer near you
close
Request more information from a dealer near you