![Lowell Manufacturing Co. - LER-2422-LRD](https://cdn-images.av-iq.com/products/enlarge/LER2422-H_2.jpg)
![Lowell Manufacturing Co. - LER-2422-LRD](https://cdn-images.av-iq.com/products/enlarge/LER2422-H_2.jpg)
![Lowell Manufacturing Co. - LER-2422-LRD](https://cdn-images.av-iq.com/products/gallery/small/LER2422-Hb_1.jpg)
![Lowell Manufacturing Co. - LER-2422-LRD](https://cdn-images.av-iq.com/products/gallery/small/LER2422-R_1.jpg)
![Lowell Manufacturing Co. - LER-2422-LRD](https://cdn-images.av-iq.com/products/gallery/small/LER2422-F_1.jpg)
![Lowell Manufacturing Co. - LER-2422-LRD](https://cdn-images.av-iq.com/products/gallery/small/LER2422-T_1.jpg)
![Lowell Manufacturing Co. - LER-2422-LRD](https://cdn-images.av-iq.com/products/gallery/small/LER2422LRD-R_1.jpg)
Rack-Enclosed-24U, 22in Deep, 1pr Adj Rails, Less Rear Door, Black
Model: LER-2422-LRD
- Panel Space: 24U or 42.125" [1070]
- Overall Height: 48.125" [1222]
- Overall Depth: 22.00" [686]
- Overall Width: 23.06" [586]
- Construction: : Fully welded certified U.S. steel, 16- gauge frame with 14-ga. bottom reinforced at load-bearing junctions for robust support, strength equivalent to 11-ga. steel. Black wrinkle powder epoxy finish. Beveled edge corners front and rear
The EIA/TIA compliant 19" floor rack shall be Lowell model #LER-2422 with overall dimensions of 48.125"H x 27.00"D x 23.06"W; usable height of 24 rack units, and usable depth of 19.34". Rack construction shall be fully welded certified U.S. steel with 16-gauge frame and 14-gauge bottom reinforced at load-bearing junctions, all with black wrinkle powder epoxy finish. Welded sides shall feature vents at top and bottom. The rack shall include a recessed rear door with vents and key lock, removable knockout panels above and below door with 1/2" KO for wireless antennae, 1/2"-3/4" and 1"-1-1/2" EKO for conduit, and a blank project panel. The front shall feature vents along top and bottom and provisions to accept an (optional) surface-mount door with left or right hand swing. The closed steel top shall feature two vents. Rack bottom shall have an opening measuring 17.88" x 19.94" and include a grounding stud. Rack shall include 1 pair of (24U) adjustable 11-gauge steel rails tapped 10-32 on 19" E.I.A. spacing with black finish and numbered rack unit increments. The UL 2416 Listed rack shall be manufactured in the U.S.A. with a UL Listed load capacity of 800 lbs.
- Panel Space: 24U or 42.125" [1070]
- Overall Height: 48.125" [1222]
- Overall Depth: 22.00" [686]
- Overall Width: 23.06" [586]
- Construction: : Fully welded certified U.S. steel, 16- gauge frame with 14-ga. bottom reinforced at load-bearing junctions for robust support, strength equivalent to 11-ga. steel. Black wrinkle powder epoxy finish. Beveled edge corners front and rear
- Front: Upper and lower vents. Frame nutserts are ready to add optional surface-mount door (left or right swing). Order front door separately
- Rear: Removable knockout panels in frame above and below door feature combination EKOs for conduit (1/2"–3/4" and 1"–1-1/2") and KOs for wireless antennae (1/2"). Removable blank project panel in frame below door. Standard model includes recessed door wit
- Sides (welded): Welded side panels with vents at top and bottom
- Bottom (open access): Includes 10-32 threaded grounding stud in corner, 3/8"-16 threaded T-nuts for (optional) leg levelers, and holes for anchor bolts (by others). Opening is 17.88"D x 19.94"W
- Closed Top (with vents): Steel top with two vents
- Cable Management: Combination knockouts in rear
- Rack Rails - 18U (fully adjustable): One pair of 11-ga. steel 10-32 threaded rails on E.I.A. spacing with bi-directional numbered RU increments (rails mount in either direction). Black finish. Clearance from front rail to outside frame (1.75"), from front
- Hardware: Black pilot point screws with captive washers for quick installation. (25)
- Compliance: EIA/TIA compliant. RoHS compliant. UL 2416 Listed in U.S.A. and Canada
- UL Listed Load Capacity: 800 lbs. [362 kg]
- Optional: Front door, additional rails, mobile or stationary base, leg levelers
- Rack Type - Standalone
- Spec Sheet available - Yes
- Exterior Depth/Length: 22 in
- Exterior Height: 48.13 in
- Exterior Width: 23.06 in
- Interior Depth/Length: 19.34 in
- Interior Height: 42.13 in
- Rack Units (Available): 24
- Rack Units (Height): 42.13
- Depth: 22 in
- Height: 48.13 in
- Width: 23.06 in
![Company logo](https://cdn-images.av-iq.com/company/300083medium.gif)
Avidex Industries, LLC
8509 154th Ave NE
Suite 100
Redmond, WA 98052
USA
(425)643-0330
www.avidex.com