Racks : Racks & Rack Frames : Lowell Manufacturing Co. - LCR-1018

Rack-Credenza-10U, 18in Deep, Fully Welded, Black

Series: LCR

Model: LCR-1018

Open frame (top/bottom/sides/front/back)
Corner post mounting rails tapped 10-32, punched for clean wire tie-off
Side obrounds for cable management
Base/top with grounding studs and provisions to accept anchor bolts (not included)
Corner holes/slots for anchoring and positioning

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Other Options

<B>A&E SPECIFICATIONS</B>: The EIA/TIA compliant open frame rack shall be Lowell Model No. LCR-1018, which shall be built to EIA standards for mounting electronics. Dimensions shall be 18.44"H x 18.00"D x 19.25"W with 10U panel space. The rack shall be fully welded certified U.S. steel construction with 16-gauge top and bottom, 11-ga. corner post rails tapped 10-32 and multiple openings for cable and wire management. Finish shall be black semi-gloss powder epoxy paint.

Open frame (top/bottom/sides/front/back)
Corner post mounting rails tapped 10-32, punched for clean wire tie-off
Side obrounds for cable management
Base/top with grounding studs and provisions to accept anchor bolts (not included)
Corner holes/slots for anchoring and positioning
Load capacity 250 lbs.
Smooth black powder epoxy finish
Panel mounting hardware
SPECIFICATIONS:
Rack Space: 10U
Rack Height: 18.44 in.
Rack Width: 19.25 in.
Rack Depth: 18.00 in.
COMPLIANCE & CERTIFICATION
EIA/TIA compliant
RoHS compliant
Certified U.S. steel
Made in Missouri, U.S.A.