Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Signal Processing Systems : Receivers & Transmitters : Listen Technologies Corporation - LT-800-216-01
Request Quote
All Products
Stationary RF Transmitter (216 MHz)
Series: FM
Model: LT-800-216-01
- Highlights
- Superior Audio Quality
- Long transmission range
- Designed for installation
- Advanced audio processing
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
Accessories
Thanks to its outstanding audio quality, the Listen LT-800 Stationary Transmitter can be used in a variety of applications. The LT-800 is connected to your main audio system, broadcasting a high quality audio signal to belt pack receivers, stationary receivers, or wireless speaker / receivers. The end result - your audience can hear and understand the presentation better because of improved speaker placement or because they have their own belt pack and headset. The signature Look & Listen LCD shows channel, lock, programming and RF power.
Includes
LT-800 Stationary Transmitter
LA-207 12 VDC Replacement Power Supply for LT-800
Quick reference card
- Highlights
- Superior Audio Quality
- Long transmission range
- Designed for installation
- Advanced audio processing
- Limited Lifetime Warranty
- Wireless Receiver Transmission - RF
- Wireless - Yes
- Spec Sheet available - Yes
- RF Frequency Range 216MHz: 216.0125 - 2169875 MHz
- Number of Channels: 57
- Frequency Accuracy: ± .005 % stability 0 to 50 degrees C (32 to 122 degrees F)
- Transmitter Stability: 50 ppm
- Transmitter Range 216MHz: 3,000(914) feet (m)
- Output Power 216MHz: 100 mW max allowed by FCC
- Antenna: Several available. See www.ListenTech.com for details
- Antenna Connector: Reverse BNC
- Compliance: FCC Part 90, Industry Canada
- System Frequency Response 216MHz: 50 - 10 kHz (±3dB). All system specifications are end-to-end .
- System Signal to Noise Ratio 216MHz: 80 dB SQ enabled, A-weighted. SQ disabled: 50dB in 216MHz. All system specifications are end-to-end .
- System Distortion: <2 % Total harmonic distortion (THD) at 80% deviation. All system specifications are end-to-end
- Audio Input 1 Connector: Rear panel. Female–XLR and ¼ in combo connector, balanced.
- Audio Input 1 Nominal Input Level: -55/0 dBu Rear panel. Female–XLR and ¼ in combo connector, balanced, -55/0dBu (mic/line) nominal input level adjustable, -30/+21dBu (mic/line) maximum, impedance 1k/20k Ohms (line/mic)
- Audio Input 1 Maximum Input Level: -30/+21 dBu Mic/line, adjustable
- Audio Input 1 Impedance: 1/20 k ohms Line/mic
- Audio Input 2 Connector: Rear panel. One Phono connector, unbalanced.
- Audio Input 2 Nominal Input Level: 10/+10 dBu Line/speaker, adjustable
- Audio Input 2 Maximum Input Level: 30 dBu
- Audio Input 2 Impedance: 100 k ohms
- Combined Audio Output (Mix) Connector: Rear panel. One Phono connector, unbalanced.
- Combined Audio Output (Mix) Nominal Input Level: 0 dBu
- Combined Audio Output (Mix) Maximum Input Level: +19 dBu
- Combined Audio Output (Mix) Impedance Level: 10 ohms
- Headphone Output Connector: Front panel. One 3.5mm connector.
- Headphone Output Maximum Output Level: +14 / 250 dBU / mW Unbalanced, adjustable output level.
- Headphone Output Impedance: 32 ohms
- RF Power Selection: Rear panel. Full, ½, ¼ (see "Output Power" above).
- Set-up Controls: Front Panel. Input level, mix level (modulation), contour equalization
- User Controls: RF power, test tone, channel UP and DOWN, Input 1: line or mic level, Input 2: speaker or line level.
- Programming: Channel selection can be locked by holding the UP and DOWN button 5 seconds.
- Input VU Meter: Dual Ten step LED (eight green, two red)
- Mix VU Meter: Ten step LED (eight green, two red)
- RF Power: Four step green LED
- Power: Green LED illuminates when the unit is powered up
- LCD Display: Channel and lock status
- Test Tone: Red LED illuminates when test tone enabled
- Power Supply Type: In-line power supply, Listen part number LA-201
- Power Supply Input: 120 / 60 / 19 VAC / Hz / Watts Maximum continuous
- Power Supply Output: 15 / 1 VAC / A
- Power supply connector: .02 x .01 (5.0 x 2.5) in (mm) OD x ID, barrel type
- Compliance: UL Listed
- Dimensions: 8.0 x 8.0 x 7.75 (20.3 x 20.0 x 4.45) in (cm) Width by depth by height
- Unit Weight: 3.0 (1.4) lbs (kg)
- Unit Weight with LA-201 Power Supply: 4.4 (2.0) lbs (kg)
- Shipping Weight: 5.0 (2.3) lbs (kg)
- Rack Mounting: 1/2 rack unit (RU) Rack mounting kit available (LA-326)
- Temperature - Operation: -10 to 40 (14 to 104) degrees C (degrees F)
- Temperature - Storage: -20 to 50 (-4 to 122)
- Humidity: 0 to 95 % Relative humidity, non-condensing
- Depth: 7.70 in
- Height: 8 in
- Width: 8 in
- Shipping Weight: 5 lbs
LA-102
- Telescoping Top Mounted Antenna (216 MHz)
LA-107
- Ground Plane Remote Antenna (216 MHz)
LA-112
- RG-58 50 Ohm Coaxial Cable (Per ft.)
LA-113
- RG-8 50 Ohm Low-Loss Coaxial Cable (Per ft.)
LA-117
- Coaxial Dipole Remote Antenna (216 MHz)
LA-122
- Universal Antenna Kit (72 and 216 MHz)
LA-124
- 90° Helical Antenna (216 MHz)
LA-126
- Antenna Kit for Rack Mount (216 MHz)
LA-127
- RG-58 BNC Connector
LA-128
- RG-8 BNC Connector
LR-100-216
- Stationary RF Receiver/Power Amplifier (216 MHz)
LR-400-216
- Portable Display RF Receiver (216 MHz)
LT-800 Stationary FM Transmitter Data Sheet
1139 kb
- Data Sheet
Project List
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Avidex Industries, LLC
close
Avidex Industries, LLC
8509 154th Ave NE
Suite 100
Redmond, WA 98052
USA
(425)643-0330
www.avidex.com
Contact in regards to this product:
Listen Technologies Corp.
Model: LT-800-216-01
Request more information from a dealer near you
close
Request more information from a dealer near you