Option Card, Local Unit, Di-di analog Stereo Audio, RS-232, Embedded USB2.
Series: Draco vario add-on modules
Model: L474-BAE2
- Enables bidirectional USB data transmission between workstation (CON unit) and computer (CPU unit)
- Transmission in the data stream of the main module, no additional port on the matrix required (function is also given over matrix)
- USB 2.0 support backward compatible to USB 1.1
- Maximum bandwidth 50/100 Mbit/s (flex speed)
- Parallel bidirectional stereo audio
Function
The add-on module for USB 2.0 embedded plus RS232 and analog audio provides bidirectional USB 2.0 transmission, serial data and analog audio transmission to existing systems. USB signals are transmitted with a speed of up to 50/100 Mbit/s. The RS232 interface supports a fullduplex transmission. The signals are transmitted within the KVM data stream via the main extender module. No additional Cat X or fiber link is required.
Application
The module offers four USB ports on the CON side, each with 500 mA supply for various devices and applications. Many USB 2.0 devices such as mass storage, graphic tablets, touch screens and fingerprint sensors can be connected near the workstation and integrated into existing systems. Depending on the device, USB data is transferred in isochron dating or bulk process. The additional serial interface (RS232) includes hardware handshake. DCE devices may be connected to enable direct connection of devices such as touch screens or joysticks. The audio interface allows parallel, bidirectional stereo signal transmission. A line level input allows signal transmission from a sound card or any other line level devices. You can easily connect peripheral devices such as microphones, headsets or speakers.
De-embedding
Commonly used AV and broadcast signals, including SDI, HDMI and DisplayPort include both audio and video signals within a single cable interface. When extended to the analog audio module, the audio signals are maintained within the AV interfaces and additionally extracted and converted to analog audio for output on dedicated audio connectors. The module also allows for the conversion of digital audio signals from CPU add-on modules to analog outputs.
Installation
The Draco vario system allows flexible mounting of modules on all main modules and in all Draco vario chassis.
- Enables bidirectional USB data transmission between workstation (CON unit) and computer (CPU unit)
- Transmission in the data stream of the main module, no additional port on the matrix required (function is also given over matrix)
- USB 2.0 support backward compatible to USB 1.1
- Maximum bandwidth 50/100 Mbit/s (flex speed)
- Parallel bidirectional stereo audio
- Enables serial data transmission between workstation (CON unit) and computer (CPU unit)
- Baud rate up to 19,200 Baud
- Module can be operated with all Draco vario and Draco ultra KVM extenders
- Input/Output Board/Card Type - Audio
- Spec Sheet available - Yes
- Connection format: DTE (Data Terminal Equipment)
- Speed: Up to 19,200 baud
- Data Format: Format-independent
- Transmission Type: Digitilizes virtually CD quality (16 bit, 38.4 kHz)
- Signal Level: Line Level (5 Volt Pk-Pk maximum)
- Input Impedance: 47 kOhm
- Output Impedance: 270 Ohm
- Connection: 2x 3.5 mm stereo jack plug (Audio IN & Audio OUT)
- USB mode: USB 1.1/ 2.0 (50/100 Mbit/s)
- Maximum Distance: Max. 10 km range (when used with fiber optic main modules and their incl. SFP for Single-Mode)
- Power Consumption: CPU: 160 Ma; CON: 2240 mA (depending on connected devices)
Avidex Industries, LLC
8509 154th Ave NE
Suite 100
Redmond, WA 98052
USA
(425)643-0330
www.avidex.com