Masterflex Single Redundant Local Unit, DVI-D, USB 2.0, CATX
Series: KVM MASTERflex single redundan
Model: KT-6012L
- DVI-D/USB2.0 Extender over IP, redundant
- Single redundant in copper/CATx
- Max resolution
- 1920 x 1200 at 60 Hz
- Max distance 150m
MASTERflex single redundant is a highly optimized KVM Extender over IP and covers a range of 100m/328ft at a resolution of 1920x1200 at 60Hz and is available in copper as single version. Redundant for high security in critical applications.
The kvm-tec „USB save“ function prevents virus intrusion via the USB interface by disabling mass storage devices.
USB 2.0 in house development The in-house developed USB 2.0 implementation supports typical USB devices like touch screens, sound modules, printers and alike components. On top the support for memory devices such as thumb-drives and USB HDDs can be enabled or disabled on demand providing another layer of security. And of course keyboards and mice are supported, too.
Infrastructure Masterflex locals and remotes are small form factor devices. They fit easily underneath a desk and up to four units can be mounted on a 19”- shelf. Single-sided interface orientation provides easy access in setup and service. They provide two power inputs for redundant feeding. Masterflex is designed fanless and with that noiseless for silent and ergonomic work spaces
Bandwidth reduction Masterflex allows limiting the transmission bandwidth limitation in nine fix steps. This allows to managed network utilization by reducing operational performance. Depending on the use case, this might not even have a recognizable impact (e.g. static image monitoring)
Matrix Switching System Combining multiple Masterflex extender locals and remotes together via a L3 network switch requires a central Switching Manager creating a multi-point matrix switching system with access control and other administrative and operational functionality.
Compatibility Masterflex extenders are compatible to ECOsmart and all Flexline extenders. In matrix setups they can be combined with media4Kconnect and Scalableline extenders lining up to a homogeneous system managed by Switching Manager.
- DVI-D/USB2.0 Extender over IP, redundant
- Single redundant in copper/CATx
- Max resolution
- 1920 x 1200 at 60 Hz
- Max distance 150m
- 4 single Master¬ ex KVM Extender in 1U
- Sound embedded
- Full HD videos in real time
- USB transfer rate max 480Mbit/s
- Only one cable for USB and Video
- DVI extension without quality loss
- Feature - freeze last image
- Local/CPU -Remote/CON Monitor Output
- Point to point - matrix switching system with switch (Layer3)
- PoE version opt (PoE capable network switch)
- Includes:
- 1 x MV 1 local (CPU)
- 1 x wall power supply unit l 12V 1A (EU-plug or INT plug)
- 1 x DVI - DVI cable 1,8m (5.9ft)
- 1 x USB cable 1,8m (5.9ft)
- 1 x VGA - DVI cable 1,8m/5.9ft (opt)
- 2 x Audio cable 1,8m/5.9ft (opt)
- 4 x rubber feet
- Quick Instruction
- Extender Type - KVM
- Rackmountable - Yes
- Warranty - Yes
- Spec Sheet available - Yes
- Warranty (Length/Type): 2 Years
- Depth: 4.23 in
- Height: 1.69 in
- Width: 4.29 in
- Product Weight: 0.65 lbs
- Shipping Weight: 1.96 lbs
- Operating Temperature (Maximum): 113 F
- Operating Temperature (Minimum): 32 F
- Certifications: CE, FCC
- Current Draw: 1 Amps
- DC Voltage: 12 Volts
- Video: 1 x DVI in, 1x DVI out
- USB 2.0: 1 x USB-B to PC
- Audio: 1 x 3,5mm jack (Line In), 1 x 3,5mm jack (Line out)
- Signal Type: DVI-D, DVI-I
- Resolution: Max. 1920x1200 at 60Hz
- Type Bandwidth: Analogue/Embedded 16bit, 44kHz, 2ch
- Network Interface: RJ45
- Temperature Humidity: 25 to 80 °C /-13 to 176 F < 80%, non condensing
- Active Power: 6 Watt
- Cooling: Free air convection
- Compression factor: 3, 5 depending on image content
Avidex Industries, LLC
8509 154th Ave NE
Suite 100
Redmond, WA 98052
USA
(425)643-0330
www.avidex.com