Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
2 Channel Dimmer Module, 2 Feeds - International Version, 230V
Series: CLXI
Model: CLXI-2DIM2
Part #: 6500178
- Button setup is used for manual channel activation and TSID
- Green LED indicators indicates line power is applied to LINE terminal
- Yellow LED indicators indicates communication with control system
- Red x4 LED indicators indicates state of each channel
- Red LED indicators indicates unit is in setup/manual mode
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
Accessories
Lighting control dimmer module provides 2 independent channels of dimming for 230V incandescent, magnetic low-voltage, neon/cold cathode and dimmable 2-wire fluorescent loads. Each channel is rated for 2300W, with total module rating of 4600W when fed from two separate 16A feeds. Air-gap relays are provided on each channel output allowing an individual circuit to be serviced without disabling entire module. CLXI-series dimmers are rigorously built using 40A triacs and oversized heat sinks for ultimate reliability. Split-bobbin transformers and ground referenced electronics deliver superior performance. Lamp flicker is minimized through Crestron's innovative zero-crossing detection technique backed by proprietary firmware. Low-maintenance convection cooling assures quiet and trouble-free operation.
- Button setup is used for manual channel activation and TSID
- Green LED indicators indicates line power is applied to LINE terminal
- Yellow LED indicators indicates communication with control system
- Red x4 LED indicators indicates state of each channel
- Red LED indicators indicates unit is in setup/manual mode
- Spec Sheet available - Yes
- Load Rating Dimmer Channels: 2
- Load Rating Per Channel: 10 A (2300W)
- Load Rating Module Total: 20 A (2990W)
- Load Types: Incandescent, Magnetic Low-voltage, Neon/Cold Cathode, Dimmable 2-Wire Fluorescen
- Line Connections via CLTI or CLTIBN: (1) DIN rail terminal block, brown, line power input
- DIM Connections via CLTI or CLTIBN: (4) DIN rail terminal blocks, red, channel outputs
- Neutral Input Connections via CLTI or CLTIBN: (1) DIN rail terminal block, blue, line input neutral
- Neutral Output Connections via CLTI or CLTIBN: (4) DIN rail terminal blocks, blue, channel output neutrals
- Power Requirements: 230Vac, 50/60Hz, single-phase
- Heat Dissipation: 114 BTU/hr (Maximum load)
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Depth: 3.43 in
- Height: 7.59 in
- Width: 6.92 in
- Product Weight: 3 lbs
- AC Voltage: 230 Volts
CLX-1DIMU4-HP
- 4-channel 1-feed Universal Dimmer Module, High Power, 120V
DIN-2LEDPWM8
- 2 Channel RGBW LED Dimmer, DIN Rail Mount
Dimmer Module
461 kb
- Data Sheet
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Avidex Industries, LLC
close
Avidex Industries, LLC
8509 154th Ave NE
Suite 100
Redmond, WA 98052
USA
(425)643-0330
www.avidex.com
Contact in regards to this product:
Crestron Electronics, Inc.
Model: CLXI-2DIM2
Request more information from a dealer near you
close
Request more information from a dealer near you