4K60 4:4:4 DM Essentials Transmitter Receiver Pair for USB-C DisplayPort and USB 2.0 Signal Extension over CATx Cable, Wall Plate, White
Model: DM-EXT-2011-2G-W KIT
Part #: 6513865
- 4K60 video with 4:4:4 color sampling
- 2-gang wall plate transmitter and receiver for extension of a USB-C® DisplayPort™ AV signal, and USB 2.0 data signals over a CAT5e or higher cable
- 2x1 auto-switching transmitter and 2x1 auto-switching receiver for extension of a USB-C® DisplayPort™ AV signal or HDMI® signal and USB 2.0 data over a CAT5e or higher cable
- HDR10, HDR10+, and Dolby Vision® video formats
- Signal extension distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft (70 m) for 1080p, WUXGA, and 2K signals
The DM-EXT-2011-2G KIT consists of a wall plate transmitter (HD-TXU-4KZ-111-2G[-W/B]) and receiver (HD-RXU-4KZ-101-E), and enables the extension of HDMI® and USB 2.0 signals. This is useful in applications where an AV source is located remotely from its destination, such as a display, projector, or codec solution. A CAT5e or higher twisted pair cable must be used to connect the transmitter and receiver.
The DM-EXT-2011-2G KIT is available in two models, the DM-EXT-2011-2G-B KIT and DM-EXT-2011-2G-W KIT. The DM-EXT-2011-2G-B KIT includes a HD-TXU-4KZ-111-2G-B black wall plate transmitter, and the DM-EXT-2011-2G-W KIT includes a HD-TXU-4KZ-111-2G-W white wall plate transmitter.
4K60 4:4:4 and HDR Support
The DM-EXT-2011-2G-B-KIT supports video resolutions up to 4K60 with 4:4:4 color sampling. HDR10, HDR10+, and Dolby Vision® video formats are also supported.2
USB 2.0 Data Extension
Two USB 2.0 host ports are provided on both the HD-TXU-4KZ-111-2G and HD-RXU-4KZ-101-E, enabling connection to a wide variety of supported USB 2.0 peripheral devices.4
Low Profile Installation
The transmitter and receiver can be placed on or attached to a flat surface. The transmitter . The receiver can be mounted onto a wall behind a display or onto a ceiling above a projector. The devices are also rack rail mountable.
- 4K60 video with 4:4:4 color sampling
- 2-gang wall plate transmitter and receiver for extension of a USB-C® DisplayPort™ AV signal, and USB 2.0 data signals over a CAT5e or higher cable
- 2x1 auto-switching transmitter and 2x1 auto-switching receiver for extension of a USB-C® DisplayPort™ AV signal or HDMI® signal and USB 2.0 data over a CAT5e or higher cable
- HDR10, HDR10+, and Dolby Vision® video formats
- Signal extension distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft (70 m) for 1080p, WUXGA, and 2K signals
- EDID and HDCP 2.3 management
- Consumer Electronics Control (CEC) capability
- EDID and CEC pass-through capability
- Low-profile installation
- 100-240VAC power pack included
- Warranty - Yes
- Spec Sheet available - Yes
- Humidity: 10% to 90% RH (non-condensing)
- DC Voltage: 24 Volts
- Audio:
•Input Signal Type: DisplayPort over USB-C (DisplayPort Alt Mode)
•Output Signal Type: HDMI
•Digital Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS ES, DTS 96/24, DTS HD® High Res, DTS-HD Master Audio, DTS:X®, LPCM up to 8 channels - Video:
•Input Signal Types: DisplayPort™ over USB-C® (DisplayPort Alt Mode) with HDR10, HDR10+, Dolby Vision®, Deep Color, and 4K60 4:4:4 support
•Output Signal Types: HDMI® with HDR10, HDR10+, Dolby Vision, Deep Color, and 4K60 4:4:4 support
•Copy Protection: HDCP 2.3 - WEIGHT:
•Transmitter: 7.25 oz (206 g)
•Receiver: 1.19 lb (0.54 kg) - Color: White
- Certifications: CE, IC, FCC
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Current Draw: 2.50 Amps
- AC Voltage (Minimum): 100 Volts
- AC Voltage (Maximum): 240 Volts
- COMMUNICATIONS:
•Ethernet: 100/1000 Mbps pass-through
•HDMI: HDCP 2.3, EDID, CEC pass-through
•DM: HDCP 2.3, EDID; USB 2.0 up to 300 Mbps
•USB: USB signal extension via USB 2.0 host ports - Construction:
•Chassis (Transmitter): Metal housing and bracket with black or white polycarbonate front label overlay
•Chassis (Receiver): Metal, black finish, vented sides, 2 mounting flanges
•Mounting (Transmitter): Mounts in a 2-gang (or larger) 2 in. (51 mm) deep U.S. electrical box or plaster ring (not included)
•Mounting (Receiver): Surface or rack rail mount
•Faceplate (Transmitter): Requires decorator style faceplate (FP-G2-DM Series, sold separately) - Connectors - Receiver (HD-RXU-4KZ-101-E) :
•DM IN: (1) 8-pin RJ-45 yellow connector, female, shielded; DM input port for connection to the transmitter
•HDMI OUTPUT: (1) HDMI Type A connector, female; HDMI digital video/audio output (DVI compatible4)
•LAN: (1) 8-pin RJ-45 connector, female; 100BASE-TX/1000BASE-T Ethernet port; Receives Ethernet signal from the transmitter over the DM connection
•24 VDC 1.4A: (1) 2.1 x 5.5 mm DC power connector; 24VDC power input; PW-2420RU power pack included
•SERVICE: (1) USB 2.0 Type-A connector, female; Used for firmware loading, configuration management, or as a USB host port for one TT-100 series cable caddy (sold separately); Can also provide up to 5V 500 mA power to a USB powered device
•HOST: (2) USB Type-A connectors, female; USB 2.0 host ports; USB signal extender ports for connection to USB mice, keyboards, or other USB 2.0 peripheral devices; Available Power: 500mA at 5VDC per port
•Ground: (1) Chassis ground lug - Controls and Indicators - Receiver (HD-RXU-4KZ-101-E) :
•PWR: (1) Green/amber bi-color LED; Amber indicates that the device is booting; Green indicates that the device is operational
•DM IN: (2) LEDs on RJ-45 connector, one green and one amber; Green indicates that DM link is established; Flashing amber indicates non-HDCP video; Solid amber indicates HDCP video
•LAN: (2) LEDs on RJ-45 connector, one green and one amber; Green indicates that a 100 Mbps link is established; Solid amber indicates that a 1000 Mbps link is established; Flashing amber indicates 1000 Mbps Ethernet activity - Dimensions - Receiver (HD-RXU-4KZ-101-E) :
•Height: 5.11 in. (130 mm)
•Width: 4.19 in. (106 mm) with mounting flanges attached
•Depth: 7.94 in. (202 mm) - Dimensions - Transmitter (HD-TXU-4KZ-111-2G) :
•Height: 4.12 in. (105 mm)
•Width: 3.57 in. (91 mm)
•Depth: 1.70 in. (43 mm) - Connectors - Transmitter (HD-TXU-4KZ-111-2G) :
•24 VDC 0.5A: (1) 2-pin 3.5 mm detachable terminal block; 24VDC power input; Power pack not included
•DM: (1) 8-pin RJ-45 connector, female, shielded; DM output port for connection to the receiver
•USB INPUT: (1) USB Type-C® connector, female; Digital video/audio input using DisplayPort Alt Mode; USB 2.0 data support
•HOST: (2) USB Type-A connectors, female; USB 2.0 host ports; USB signal extender ports for connection to USB mice, keyboards, or other USB 2.0 peripheral devices; Available Power: 500mA at 5VDC per port
•Ground: (1) Chassis ground lug - Controls and Indicators - Transmitter (HD-TXU-4KZ-111-2G):
•LINK: (1) Green LED, indicates that DM link is established
•PWR: (1) Green/amber bi-color LED;
•Amber indicates that the device is booting; Green indicates that the device is operational
•USB IN: (1) Green LED, indicates that the device is receiving a DisplayPort over USB-C (DisplayPort Alt Mode) input signal
•DM OUT: (2) LEDs on RJ-45 connector, one green and one amber; Green indicates that DM link is established; Flashing amber indicates non-HDCP video; Solid amber indicates HDCP video
•RESET: (1) Push button, restores factory default settings
Avidex Industries, LLC
8509 154th Ave NE
Suite 100
Redmond, WA 98052
USA
(425)643-0330
www.avidex.com