Enova DGX DXLink Multimode Duplex Fiber Output Board
Model: DGX-O-DXF-MMD
Part #: FG1058-632
- HDCP Compliance Over Fiber – Transmit HDCP compliant video including HDMI up to 10 km
- Industry Leading Data Rate – DXLink is leading the way with an optical transport rate of 10 Gbps
- Secure and Isolated – Fiber inherently provides extra security and electrical isolation making it the transport method of choice for many mission-critical secure environments
- Field Serviceable Fiber Modules – Easily remove and replace SFP modules in the field
The DGX-O-DXF-MMD is a DXLink Fiber output board with field serviceable SFP modules designed for use with multimode fiber, and is compatible with the Enova DGX 8, 16, 32 and 64 Digital Media Switcher Enclosures. Use it as part of an integrated system to transmit audio, video, control and Ethernet over multimode fiber from up to 300 meters to a DXLink Receiver. Fiber uses light to send data, rather than electric signals making it both the highest quality and most secure way to transmit video as it is not susceptible to electronic noise or non-intrusive physical wiretapping.
USB (HID)
Use the Enova DGX Digital Media Switcher in conjunction with DXLink Transmitters and Receivers (twisted pair and/or fiber), connect a DXLink Transmitter to a PC and a DXLink Receiver to a keyboard and mouse, the system then emulates commands from the receiver back to the PC. For a list of HID devices which have been tested and found to be working well with the latest firmware please view the document “DXLink HID Keyboard and Mouse Supported Devices”.
COMMON APPLICATIONS
The Enova DGX DXLink Output Board is ideal for applications where the demands of high-resolution video clarity, long distance transmission and maximum security need to be met without compromise including campus-wide distribution of sources that are shared between classrooms, secure military applications, casinos, arenas and museums.
- HDCP Compliance Over Fiber – Transmit HDCP compliant video including HDMI up to 10 km
- Industry Leading Data Rate – DXLink is leading the way with an optical transport rate of 10 Gbps
- Secure and Isolated – Fiber inherently provides extra security and electrical isolation making it the transport method of choice for many mission-critical secure environments
- Field Serviceable Fiber Modules – Easily remove and replace SFP modules in the field
- Input/Output Board/Card Type - Audio
- Input/Output Board/Card Type - Data
- Input/Output Board/Card Type - Video
- Spec Sheet available - Yes
- Regulatory Compliance: HDCP
- General:
- Compatible AMX Products: Must be used in conjunction with an Enova DGX 8, 16, 32 or 64 Digital Media Enclosure and a DXLink HDMI Multimode Fiber Receiver, Duplex (FG1010-562)
- Regulatory Compliance: See Enova DGX Digital Media Switcher Enclosure for regulatory compliance
- Safety Certification: Class 1 Eye safe per requirements of IEC 60825-1 / CDRH
- Recommended Accessories: DXLF-HDMIRX-MM-D, DXLink HDMI MM Fiber RX, Duplex (FG1010-562)
- SIGNAL TRANSPORT – DXLINK W/ MULTIMODE FIBER, DUPLEX:
- Compatible Formats: HDMI Video / Audio / Ethernet / USB(HID) /Control
- Signal Type Support: DXLink Multimode Fiber, Duplex
- Connectors: (4) Duplex LC Fiber Ports, conforming to ANSI TIA/EIA 604-10 (FOCIS 10A)
- Transport Layer Throughput (Max): 10.3125 Gbps
- Fiber Transceiver Type: 10G SFP+
- Fiber Cable Type: OM3 50/125µm
- Fiber Cable Length: Up to 984 ft (300 m)
- Optical Wavelength: 850 nm
- Multimode Optical Budget:
- 6.8 dB (typ), 3.2 dB (stressed) between DXLink Fiber Transceivers
- Optical Modulation Amplitude (OMA): -4.3 dBm (min)
- Optical Modulation Amplitude (OMA) Sensitivity: -11.1 dBm (typ), -7.5 dBm (stressed)
- Multimode Optical Transceiver Mean Output Power: -1 dBm (average power)
- DXLink Fiber Output Board Propagation Delay: 5 us
- Video Data Rate (Max):
- 4.95 Gbps / 5.568 Gbps
- 5.568 Gbps supported when the HDMI Output Board scaler or DXLink RX scaler is in Bypass mode using CEA-861 formats and resolution is 1080p60 or less
- Video Pixel Clock (Max):
- 165 MHz / 185.625 MHz
- 185.625 MHz supported when the HDMI Output Board scaler or DXLink RX scaler is in Bypass mode using CEA-861 formats and resolution is 1080p60 or less
- Progressive Resolution Support: 480p up to 1920x1200 @ 60 Hz
- Interlaced Resolution Support: 480i, 576i, 1080i
- Deep Color Support:
- 24-bit, 30-bit
- 30-bit supported when the HDMI Output Board Scaler or DXLink RX Scaler is in Bypass mode and format is 1080p60 or less
- Color Space Support:
- RGB 4:4:4
- YCbCr 4:4:4 and 4:2:2
- Input signal support for YCbCr: 4:4:4 and 4:2:2, output color-space is converted to RGB 4:4:4
- 3D Format Support
- Yes (scaler on corresponding output board or RX must be set to bypass mode)
- Frame Packing 1080p up to 24 Hz
- Frame Packing 720p up to 50/60 Hz
- Frame Packing 1080i up to 50/60 Hz
- Top-Bottom 1080p up to 24 Hz
- Top-Bottom 720p up to 50/60 Hz
- Side-by-Side Half 1080i up to 50/60 Hz
- Audio Format Support:
- Dolby TrueHD, Dolby Digital, DTS-HD Master Audio, DTS, 2 CH through 8 CH L-PCM
- Dolby Digital and DTS support up to 48 kHz, 5.1 channels
- Audio Resolution: 16 bit to 24 bit
- Audio Sample Rate: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz
- Local Audio Support: Yes, Insertion and/or Extraction of 2 CH L-PCM selectable by channel when used in conjunction with Enova DGX Audio Insert / Extract Board
- HDCP Support:
- Yes, full matrix HDCP support (includes any input to any or all outputs)
- Key Management System: AMX HDCP InstaGate Pro Technology
- Key support up to 16 sinks per output, independent of source device
- CEC Support: None
- ICSP, TCP/IP, IR, Control Management: Control distribution is managed by the Enova DGX 8/16/32/64 Digital Media Switcher on-board NetLinx Master and Ethernet Switch
- EDID Support:
- EDID provided by the Enova DGX 8/16/32/64 Digital Media Switcher to the connected DXLink TX, EDID is user re-programmable
- See "Instruction Manual Enova DGX Digital Media Switchers" for supported EDID list
- USB (HID):
-
Use the Enova DGX Digital Media Switcher in conjunction with DXLink Transmitters and Receivers (twisted pair and/or fiber), connect a DXLink Transmitter to a PC and a DXLink Receiver to a keyboard and mouse, the system then emulates commands from the receiver back to the PC.
Suggested Products
Avidex Industries, LLC
8509 154th Ave NE
Suite 100
Redmond, WA 98052
USA
(425)643-0330
www.avidex.com