Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
4-Channel Field Mixer
Model: MX422
- Four servo-balanced XLR Inputs
- Two transformer-balanced XLR Outputs
- # Switchable Output Level ( Line level, or -30 dB pad)
- 1/4" TRS Stereo Monitor Input and Auxiliary Input
- Switchable 48 Volt Phantom Power for each input
Compare
Project List
Product Info
Tech Specs
Documents
The MX422 is a four channel, microphone/line mixer with balanced XLR inputs and outputs. The unit is ideal for the broadcast and video markets. It has the same features of other ENG / portable mixers without the extremely high price. MX422 FIELD MIXER METER RESPONSE: The meters are set at the factory for a 0 indication of a 0 dbv output level. Non responding meters is caused by only one thing, not enough level from the output amp. To correct this please verify the following. Start with the channel and master at center positions. Make sure the monitor switch is out. 1. Turn up the trim control to the point where the meters read the level you desire. 2. If this causes too much output from the output jacks, push in the attenuator button near the output jacks. 3. Fine tune the level you want with the channel and master controls. Finally, if the Pro standard of 0 dB is too hot for you, there are trim pots for each meter inside the unit that can be adjusted down to a 0 indication of about -10dBv.
- Four servo-balanced XLR Inputs
- Two transformer-balanced XLR Outputs
- # Switchable Output Level ( Line level, or -30 dB pad)
- 1/4" TRS Stereo Monitor Input and Auxiliary Input
- Switchable 48 Volt Phantom Power for each input
- Switchable 100 Hz Low Cut filters for each input
- # Main and Back-up battery compartments, never lose power
- Level and Pan controls for each channel
- Built in Limiter with variable Threshold control
- 20 Hz Slate tone with Slate Microphone included
- Switchable 1 kHz setup Tone
- Calibrated VU meters
- 1/4" and 3.5mm Headphone/Earphone Outputs with selectable Source Input (Main mix or Monitor input),and Level control
- Canvas case included
- Rolls PS27 external power supply included
- Applications include: DV Field Production; Electronic News Gathering; Location Recording (Dialogue and Music); Digital Recording; Broadcast Remotes; Desktop Mixing for Video Post Production
- Current Draw: 45 mA (with no Phantom Power or Signal)
- Maximum Frequency Response (Bandwidth): 30 kHz
- Maximum Frequency Response (Bandwidth): 30000 Hz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Signal to Noise Ratio: 115 dB
- Total Harmonic Distortion + Noise (THD+N): 0.05 %
- Current Draw: 0.05 Amps
- Depth: 7.25 in
- Height: 2.38 in
- Width: 9.50 in
- Product Weight: 4 lbs
- Input Impedance (mic): 10 kohms (XLR balanced)
- Input Impedance (Source): 22 kohms (RCA)
- Limiter Threshold: -5 dB to off, (fully clockwise: No Limiting)
- Setup Frequency: 1 kHz
- Slate Frequency: 20 Hz
- Output Attenuator: -30 dB
- Self Noise: -57 dB (maximum; -90 dB typical)
- Max Gain: +65 dB
- Low Cut: 100 Hz
- Trim Range: 0 to +38 dB
- Max Input: 0 dBV
- Phantom Power: 48 VDC
- Typical Batery Life: 6 hrs (2 mics, phan on, 1 headphone
- Connectors: 4 ea. Female XLR, 2 ea. Male XLR, 3 ea. 1/4”, 1 ea. 1/8” (3.5mm), 1 Center Negative power jack
- Power: 200 mA (min)
Field Mixer
665 kb
- Other
Project List
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Avidex Industries, LLC
close
Avidex Industries, LLC
8509 154th Ave NE
Suite 100
Redmond, WA 98052
USA
(425)643-0330
www.avidex.com
Contact in regards to this product:
Rolls Corporation
Model: MX422
Request more information from a dealer near you
close
Request more information from a dealer near you