Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
40W Stereo Audio Power Amplifier, 8ohms Output
Series:
Model: TX-PA40DE
- Stereo audio power amplifier
- Left and right unbalanced phono jack inputs
- Switch-selectable stereo or mono operation
- Studio quality, transparent compressor/limiter
- LED to indicate audio compression threshold
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
40W stereo audio power amplifier with 2 unbalanced line level inputs on high-reliability gold plated phono (RCA) jacks. A front-panel recessed gain control trimmer permits setting the desired amplifier output level for each channel. The gain range accommodates the range of typical unbalanced audio signal levels. Each of the 2 outputs will drive a 4ohms or 8ohms speaker or multiple speakers connected to present a 4ohms or 8ohms load to the amplifier. The output impedance is switch-selectable on the front panel of the module.
- Stereo audio power amplifier
- Left and right unbalanced phono jack inputs
- Switch-selectable stereo or mono operation
- Studio quality, transparent compressor/limiter
- LED to indicate audio compression threshold
- Outputs drive 4 or 8ohms speaker
- High-efficiency class D operation
- Thermal and short-circuit protection
- Amplifier Signal Type - Audio
- Amplifier Type - Power Amplifier
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Shipping Weight: 0.40 lbs
- Noise: < -75 dB (Below 20Wrms)
- INPUT: Line level (-10dBV nominal unbalanced), left and right
- Input Impedance: 10 kohms (Unbalanced)
- Minimum Input Levels: -18 dBV (To cross compressor threshold)
- Maximum Input Levels: +15 dBV
- Frequency Response: 20Hz to 20kHz (at +/-1dB, 4 or 8ohms)
- Compressor: Threshold nominally 2dB below rated output, automatically adjusting attack and release times
- Crosstalk: Better than 60dB (1kHz, no compression)
- Output Power: 20Wrms into 8ohms per channel, 40Wrms total, 15Wrms into 4ohms per channel, 30Wrms total
- Power Requirement: Input 100 to 240Vac, 50 to 60Hz, 1.5A, IEC C14, Output to module 24Vdc
- Package dimensions: 5.125 X 2.5 X 5.8 in
Power Amplifier
878 kb
- Data Sheet
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Avidex Industries, LLC
close
Avidex Industries, LLC
8509 154th Ave NE
Suite 100
Redmond, WA 98052
USA
(425)643-0330
www.avidex.com
Contact in regards to this product:
Radio Design Labs
Model: TX-PA40DE
Request more information from a dealer near you
close
Request more information from a dealer near you