Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Line Level Distribution Amplifier - 1x3
Model: ST-DA3
- Audio Distribution with up to 3 Outputs
- Balanced or Unbalanced Input and Outputs
- Bridge an Audio Line for Local Distribution
- Distribution with Impedance Conversion
- Distribution with Gain or Loss
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
Accessories
Videos
The ST-DA3 gives you the advantages of an audio distribution amplifier PLUS you can put it where you need it. The ST-DA3 allows bridging of any audio line, adjusting the gain, and driving up to three high or low impedance, balanced or unbalanced loads. The ST-DA3's wideband circuitry produces the unsurpassed pure clarity, low-distortion and low-noise for which RDL products are known.
The ST-DA3 features RDL's SupplyFlex power input configuration. The module will operate directly from floating 24 Vdc or bipolar dc power. If a jumper is connected between the PWR minus terminal and any module ground, the module power becomes ground-referenced.
- Audio Distribution with up to 3 Outputs
- Balanced or Unbalanced Input and Outputs
- Bridge an Audio Line for Local Distribution
- Distribution with Impedance Conversion
- Distribution with Gain or Loss
- Inputs and Outputs RF-Protected
- 1x3 Mono or Use Two Units for Stereo
- RDL® SupplyFlex™ Power Input Configuration
- Spec Sheet available - Yes
- Number of Inputs: 1
- Number of Outputs: 3
- Inputs: 20 k ohm Balanced or Unbalanced
- Input Signal: -15 to +21 dBu (for +4 dBu output)
- Maximum Input Level: +24 dBu
- Outputs (3): 150 ohm balanced or 75 ohm unbalanced
- Output Signal:
- Balanced: +4 dBu nominal balanced;
- Unbalanced: 6 dB below balanced line level
- Maximum Output Level: +25 dBu
- Frequency Response: 10 to 100000Hz (+/- 0.05 dB)
- THD+N: 0.002 % (unity gain)
- IMD: 0.003 % (unity gain)
- Noise below +4 dBu: -98 dB
- Headroom: 20 dB
- Gain: Unity +/- 17 dB (adjustable)
- CMRR: 60 dB (50 Hz to 120 Hz)
- Power Requirement: 24 to 33 Vdc @ 70 mA
EZ-ADA4
- Stereo Audio Distribution Amplifier-1X4
FP-AVDA4
- Stereo Audio/Video Distributor-1x4, Phono Jacks
RU-ADA4D
- RU-ADA4D Audio Distribution Amplifier
RU-ADA8D
- RU-ADA8D Audio Distribution Amplifier
RU-MLD4
- Mic / Line Distribution Amplifier
RU-UDA4
- Stereo Audio Distributor - 2x4 - Phono Jacks
STS-RF1
- Shielded Chassis for STICK-ON Module
STICK-ON® SERIES Model ST-DA3 Distribution Amplifier
1380491 kb
- Data Sheet
Project List
DRA-35S
STICK-ON DIN Rail Adapter
DRA-35S6
STICK-ON DIN Rail Adapter
DTB
STICK-ON® Series Detachable Terminal Block
MB-1
Mounting Kit - RU, ST and TX Series
MB-3
Kit to Mount ST, TX Series Modules on FP Panel
MSR-1
Snap Rail Adapter - STICK-ON Series
SMK-12
STICK-ON Mounting Plate
SR-12A
STICK-ON Series 19" Mounting Rack - 12 modules
SR-4
STICK-ON Series Mounting Rack - 7 Modules max.
STR-19A
STICK-ON Series Racking System - 12 Modules
STR-19B
Hinged 19-inch Rack Mount Panel
STICK-ON DIN Rail Adapter
DRA-35S6
STICK-ON DIN Rail Adapter
DTB
STICK-ON® Series Detachable Terminal Block
MB-1
Mounting Kit - RU, ST and TX Series
MB-3
Kit to Mount ST, TX Series Modules on FP Panel
MSR-1
Snap Rail Adapter - STICK-ON Series
SMK-12
STICK-ON Mounting Plate
SR-12A
STICK-ON Series 19" Mounting Rack - 12 modules
SR-4
STICK-ON Series Mounting Rack - 7 Modules max.
STR-19A
STICK-ON Series Racking System - 12 Modules
STR-19B
Hinged 19-inch Rack Mount Panel
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Avidex Industries, LLC
close
Avidex Industries, LLC
8509 154th Ave NE
Suite 100
Redmond, WA 98052
USA
(425)643-0330
www.avidex.com
Contact in regards to this product:
Radio Design Labs
Model: ST-DA3
Request more information from a dealer near you
close
Request more information from a dealer near you