Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Chime Generator
Series:
Model: FP-CH8
- 8 Individually Selectable Electronic Chimes
- Selectable Single or Repeated Chime
- Synthesized Bell Harmonics for Natural Sound
- External Chime Actuation
- Input for Background Music or Paging Audio
Compare
Project List
Product Info
Tech Specs
Documents
Accessories
The FP-CH8 is an electronic chime generator that produces eight different synthesized chimes. Each chime can consist of up to 3 tones and 3 harmonics selected to produce sonically natural effects. Certain chimes are single tones and some are a sequence. Each of the 8 chimes is triggered by an individual external closure to ground. A momentary closure to ground is required to start a chime. A single additional CONT (continuous) terminal is also provided. Each chime plays once unless the CONT terminal is grounded. The continuous function causes a chime strike or sequence to repeat until the CONT terminal is ungrounded. This function causes tone chimes (Chimes 4 and 8) to be extended in duration until the CONT terminal is released. Background music or paging audio may be connected to the MUSIC IN input. When a chime plays, the music source will be quickly faded to a level set on the front-panel DUCKING trimmer. The ducking fade depth may be adjusted from 0 dB to fully off, allowing chimes to be mixed with the music or to interrupt the music. The front-panel CHIMING indicator illuminates while music is ducked and a chime is playing. WAIT and IGNORE terminals are provided to prevent or delay chiming action.
Chime patterns are: single strick, double strick, triple strick, tone ring, manual strick, descending triple strick, eurosiren and multi-tone alert.
Chime patterns are: single strick, double strick, triple strick, tone ring, manual strick, descending triple strick, eurosiren and multi-tone alert.
- 8 Individually Selectable Electronic Chimes
- Selectable Single or Repeated Chime
- Synthesized Bell Harmonics for Natural Sound
- External Chime Actuation
- Input for Background Music or Paging Audio
- Automatic Ducking
- Music Input: 50 kO balanced or unbal, +22 dBu max.
- Frequency Response: 20 Hz to 50 kHz (+/- 0.5 dB)
- THD+N: < 0.05% (unity gain, 50 Hz to 20 kHz)
- Noise below +4 dBu: < -70 dB (unity gain)
- Headroom: > 16 dB (above +4 dBu)
- Gain: Unity to +22 dB (adjustable)
- Ducking Fade Depth: 0 dB to fully off (adjustable)
- Outputs: 150 O balanced, + 4 dBu or 75 ? unbal.
- Trigger Inputs (8): Trigger on high to low transition, 0.5 mA
- Control Inputs (3): WAIT (play delay), IGNORE (no playback), CONT (continuous repeat)
- Control Outputs (2): CHIMING (Open-collector low @ 25 mA), EOC (low 100 mS at end of chime)
- Power Requirement: GROUND-REFERENCED 24 to 33 Vdc @ 100 mA
- Height: 1.36 in. 3.46 cm
- Width: 3.25 in. 8.26 cm
- overall length: 5.0 in. 12.7 cm
- Operating Temperature (Maximum): 131 F
- Operating Temperature (Minimum): 32 F
- Total Harmonic Distortion + Noise (THD+N): 0.05 %
- Depth: 5 in
- Height: 1.36 in
- Width: 3.25 in
- Shipping Weight: 0.80 lbs
Datasheet for Chime Generator
168024 kb
- Other
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Avidex Industries, LLC
close
Avidex Industries, LLC
8509 154th Ave NE
Suite 100
Redmond, WA 98052
USA
(425)643-0330
www.avidex.com
Contact in regards to this product:
Radio Design Labs
Model: FP-CH8
Request more information from a dealer near you
close
Request more information from a dealer near you