Camera Controls : Camera Control Units : Panasonic - AK-UCU600

Camera Control Unit

Model: AK-UCU600

Contains a dual UHD 12G-SDI system, and supports 3G-SDI quad link with quadrant or two-sample interleave
Optical fiber transmission of uncompressed video signals over a distance of approx. 2,000 m between camera and CCU
Compact, lightweight unit measures 2U in height and is rack-mountable
Supports IP streaming (100 Base-T)
SD memory card can be used for saving user files and updating firmware versions

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The CCU supports UHD and HD simultaneous output while still having a compact size. HD mode enables output in 240p, 180p and 120p during normal filming. AK-UCU600 Camera Control Unit (CCU), uncompressed longdistance transmission of 4K/HD video signals via optical fiber is supported. The AK-HRP1000GJ/1005GJ Remote Operation Panels (ROP) are equipped with a color LCD display that provides excellent visibility and functions for quick response. This system achieves high-quality video and excellent operability. In cases where power is supplied by the CCU, it is possible to transmit at a long distance of up to approx. 2,000 m between the camera and the CCU. The distance can be extended up to 10,000m by providing a local power supply at the camera head and using general-purpose single mode optical fiber. Between the CCU and the ROP, in addition to a dedicated serial line, IP connection via LAN cable is also supported.

Contains a dual UHD 12G-SDI system, and supports 3G-SDI quad link with quadrant or two-sample interleave
Optical fiber transmission of uncompressed video signals over a distance of approx. 2,000 m between camera and CCU
Compact, lightweight unit measures 2U in height and is rack-mountable
Supports IP streaming (100 Base-T)
SD memory card can be used for saving user files and updating firmware versions
Dual uncompressed12G-SDI output
Supports TICO over SDI (4K over 3G-SDI) output (4K signal can be transferred by a conventional 3G-SDI cable)
Supports 1080p/i and 720p, in addition to standard output, high-speed output at 2x, 3x or 4x can be selected according to the specifications of the server
Supports HDR/SDR simultaneous output and HDR BT.2020/BT.709 simultaneous output
12G-SDI output and TICO over SDI (4K over 3G-SDI) output are compatible with the AK-UC3000

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
AC Voltage (Maximum): 240 Volts
Active Power: 500 Watt
Depth: 15.79 in
Height: 3.46 in
Width: 16.69 in
Product Weight: 19.40 lbs
Video Output: 3G/HD/SD-SDI: 7 lines (embedded audio is supported only for HD signals), HD/SD-SDI: 1 line (shared with picture monitor output embedded audio is supported only for HD signals)
HD TRUNK/TICO Output: HD-SDI: 1 line (HD TRUNK output), 3G/HD-SDI: 1 line (TICO output)
Return Input: 3G-HD/HD/SD-SDI: 4 lines (RET1 input has active-through output), Analog composite: 1 line
Prompter Input: HD-SDI: 1 line (with active-through output), Analog composite: 2 lines (through output of 1 and input of 2 share the connector)
Reference Input: BB (black burst)/tri-level: 1 line
Microphone Output: 0dBm/600-ohm, 2 lines (XLR, 3-pin, male
Communication: Intercom input/output (ENG/PROD, 0dBm, 600-ohm (4W)/1Vp-p, 200-ohm (RTS), 4W/RTS/CLRCOM): 2 lines, PGM input (0dBm/600-ohm): 2 lines, Tally input (red, green, yellow): 1 input each
Aux: WFM control 6-bit (open collector output, terminal shared with camera microphone gain setting), Camera microphone gain setting input
Trunk: RS-422/RS-232C
FRONT ROP: RS-422 1 line, 16VDC output (only one of this and REAR ROP can be selected at one time via the menu or the [ROP FRONT/REAR] selection switch on the front panel)
REAR ROP: RS-422 1 line, 16VDC output (only one of this and FRONT ROP can be selected at one time via the menu or the [ROP FRONT/REAR] selection switch on the front panel)
MSU: RS-422 1 line, GPI for control
LAN TRUNK: LAN connection with camera side via an optical cable, 1 line, 100BASE-T, 1000BASE-T
LAN: Personal computer connection for distribution via the Web 1 line, 10BASE-T, 100BASE-TX (use a crossover cable when connecting directly with a personal computer)