Camera Controls : Camera Control Units : Panasonic - AK-HCU200

Rack-mountable Camera Control Unit

Model: AK-HCU200

Allows a high-quality, uncompressed, long distance optical fiber transmission camera system to be configured at low cost
Two SDI channels and one VBS channel are provided for RET input, and prompter input (analog video signal input) is included as standard
Four SDI OUT lines are provided (two support PM output). In addition to HD video signal output, SD downconverted video signal output (SDI, analog composite) comes as standard
Setting Up CCU with a PC
Camera number and other text can be superimposed onto the color bar output signal

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The rack-mountable camera control unit offers high-quality long-distance optical fibre transmission. The cable between the camera and the CCU can be extended up to approximately 1200m. The AK-HCU200 is 59.94Hz/50Hz switchable and supports 1080/59.94i, 1080/50i, 1080/29.97PsF,*1 1080/25PsF,*1 1080/23.98PsF,*1 720/59.94p and 720/50p HD Multi-formats.

Allows a high-quality, uncompressed, long distance optical fiber transmission camera system to be configured at low cost
Two SDI channels and one VBS channel are provided for RET input, and prompter input (analog video signal input) is included as standard
Four SDI OUT lines are provided (two support PM output). In addition to HD video signal output, SD downconverted video signal output (SDI, analog composite) comes as standard
Setting Up CCU with a PC
Camera number and other text can be superimposed onto the color bar output signal
SD memory card slot allows CCU setting data to be saved on an SD memory card
2U height of this compact, lightweight unit allows 2U rack mounting

Warranty - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 170 Watt
Depth: 15.75 in
Height: 3.46 in
Width: 16.69 in
Product Weight: 14.55 lbs
Operating Humidity: 10 % to 90 % (no condensation)
Reference Input:
1 line (1 loop-through line)
Black burst/tri-level
Video Output:
HD-SDI/SD-SDI: 4 lines (2 lines shared with picture monitor output*1)
Analog composite: 1 line (1 line shared with picture monitor output*1)
Output Format: 1080/59.94i, 1080/50i, 1080/29.97PsF*2, 1080/25PsF*2, 1080/23.98PsF*2, 720/59.94p, 720/50p
Communication:
Intercom input/output: 2 lines (1/2*1) (0 dBm, 600 ohm, RTS/4W*1)
PGM: 1 line, input (0 dBm/600 ohm)
Tally input: Red, Green, 1 input each
Return Input:
HD-SDI/SD-SDI: 2 lines (switched depending on the setting)
VBS: 1 line
Prompter Input: 1 line, Analog composite
Intercom:
XLR, 5-pin, female
Input: -55 dBu to -10dBu
Output: 100 mW (max.)
LAN Port: 1 line (8-pin, RJ45)
Capacity for Supplying Power to a Camera: 190 V DC, 0.6 A
Microphone Output: 2 lines (XLR, 3-pin, male), 0 dBm/600 ohm
ROP interface: RS-422, 1 line, 12 V output
MSU interface: RS-422, 1 line, GPI for control
Warranty (Length/Type): 1 Year Limited