The ES-103U is a low-cost yet very accurate GPS Master Clock/Time Code Generator. The unit receives time and date information from Global Positioning System satellites and supplies this data to the user in the form of four (4) different types of time code ... IRIG-B, ASCII (RS-232C & USB), ESE-TC89 and ESE-TC90. Nine amber LED displays (.56") provide a digital display of the Day of Year, Hours, Minutes and Seconds data. Two (2) One Pulse Per Second outputs and a GPS "Lock" output are also standard features. A twelve-channel receiver is employed that is capable of tracking up to twelve (12) satellites simultaneously, although reception of only one is required for time data to be output. Several options are available that allow the unit to meet most any demand required of a Master Clock or Time Code Generator.
IRIG-B, ASCII (RS-232C & USB) & ESE Time Code™ Outputs
Dual 1 PPS Output (20% and 50% Duty Cycles)
Rugged Rack Mount Enclosure
Nine .56" Yellow LED Displays
GPS "Lock" Indicator
< 500 Nano-Second Accuracy
Time Zone Offset
+/- 10 Second Offset
Automatic Daylight Savings Time Correction
Digital, Video & Analog Slave Clocks Available
Legally Traceable to UTC (Universal Coordinated Time)
Loss of GPS Signal Output
Indoor/Outdoor Antenna with 16' Cable
10nS Accuracy: The accuracy of the unit is improved to 10nS.
GPS Antenna: High Performance GPS Antenna for harsh RF Environments.
Parallel BCD Output: CMOS compatible, 5-volt logic in parallel four-line format. Specify the ES-169B.
Battery Back-Up: An internal Gel-Cell battery is provided capable of maintaining the unit's microprocessor for up to a 4-hour power outage.
Clear Anodized Front Panel
DC Operation: Requires the unit to be powered from a DC source exclusively, typically +12 to +35 VDC.
Relay Closure: Option "HR" provides a user programmable relay contact closure. The standard contact closure occurs on the Hour and Half Hour. If contact closures at other times are desired, the user can program up to four relay closures using the
220 VAC/50 Hz Operation: The unit is configured to operate from 220 VAC line voltage. 117 VAC 50/60 Hz is standard.
provides a 10 MHz output and a 1 KHz output. Option '10ns' is required if option 'K' is specified.
"UL" Approved Power Supply: The unit is supplied with a UL/CSA approved wall mount power supply.
AC Voltage :
Active Power :
- 9 Digits 0.56" Yellow LED Display PTP Referenced Master Clock / Time Code Generator / NTP Server