4" 2-way Saros Integrator In-ceiling Speaker
Model: SAROS_IC4T
- 2-way in-ceiling speaker
- 4" woofer and 1" dome tweeter (nominal)
- Single front port for enhanced low-frequency response
- Built-in 30W 70/100V multi-tap transformer
- Integral metal back can with built-in cable clamp
The Saros Integrator ICI4T model is a 2-way in-ceiling speaker featuring a 4" woofer and 1" dome tweeter. A built-in 30Watt multi-tap transformer allows for use with 70 and 100 Volt distributed speaker systems. It is designed to enable quick installation and reliable performance in restaurants, retail spaces, convention facilities, airports, and office buildings.
Unitized construction of the speaker enclosure simplifies specification and installation for use in new and existing ceilings. Mounting the speaker is facilitated using toggle clamps integrated into the enclosure. A tile bridge is included to provide proper support when installed in a typical drop-tile ceiling. The tile bridge is adjustable to enable off-center speaker positioning, and can fit through the speaker cutout in blind-mount situations. A rigging point is also provided on the top of the speaker enclosure for securing to the building structure using the optional safety tether kit (SPKA-ST-15[1]).
An integral metal back can enclosure is employed to meet the requirements for installation in an environmental air-handling (plenum) space. The wiring connection is accessible on the top of the enclosure. The built-in cable clamp can accommodate one or two 1/2" or 3/4" flexible conduits. Connecting the wiring is facilitated using a detachable screw terminal block with provisions for easy parallel wiring in a multi-speaker application. Setting the 70/100V transformer tap is performed via a screwdriver-adjustable control located on the front baffle behind the grille.
SarosIntegratorICI4Tspeakers are available in white only. They are priced individually, but must be ordered in pairs.
- 2-way in-ceiling speaker
- 4" woofer and 1" dome tweeter (nominal)
- Single front port for enhanced low-frequency response
- Built-in 30W 70/100V multi-tap transformer
- Integral metal back can with built-in cable clamp
- Accommodates up to two 1/2" or 3/4" flexible conduits
- Toggle clamp mounting for fast, easy installation
- Includes Tile Bridge for installation in a drop-tile ceiling
- Meets the requirements for installation in an environmental air-handling space
- Available in white only
- Loudspeaker Mount Type - Ceiling
- Transformer Option - Yes
- Loudspeaker Voltage - 70V
- Loudspeaker Voltage - 100V
- Spec Sheet available - Yes
- 100V Taps: 7.5/15/30 Watt
- 70V Taps: 3.8/7.5/15/30 Watt
- Impedance: 8 ohm
- Product Weight: 5 lbs
- Speaker Diameter (Driver): 4 in
- Features and Performance:
•Woofer: 3.8" (97mm) cone, ported
•Tweeter: 0.98" (25mm) dome - Connections:
•Input: (1) 4-pin 5mm detachable terminal block
•Speaker input with parallel pass-thru
•Maximum Wire Size: 12AWG - Controls:
•Transformer Tap: (1) Screw driver-adjustable rotary switch on baffle
•Used to select 70/100V tap or 8 Ohms (bypass) - Construction:
•Enclosure: Metal, plenum-rated, top mounted dual cable clamp (1/2" or 3/4" flexible conduit compatible)
•Baffle: Plastic, white textured
•Grille: Perforated metal, white finish
•Mounting: Flush ceiling mount using 4 integral toggle clamps,1.4" (36mm) maximum surface thickness, 6.2in (156mm) minimum mounting depth (without conduit), 6.8" (173mm) diameter recommended cutout, tile bridge included, (1) rigging point for safety tether (SPKA-ST-15 sold separately) - Dimensions:
•Diameter: 8.11" (206mm) not including toggles
•Depth: 5.87" (149mm)
Avidex Industries, LLC
8509 154th Ave NE
Suite 100
Redmond, WA 98052
USA
(425)643-0330
www.avidex.com