Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Steinel DT VS 1 Dual Technology Vacancy Sensor, White
Series: GLA-DT-VS-1
Model: GLA-DT-VS-1-W
Part #: 6508672
- PIR and 40 kHz ultrasonic vacancy sensor
- Trigger mode settings enable what sensing technologies are used to keep the load ON
- Adjustable ultrasonic reach setting from 25% to 100%
- Line voltage lighting control (120/230/277VAC, 50/60Hz)
- 180° Coverage pattern
Product Info
Tech Specs
Related Products
Documents
A line voltage, single relay, Dual Technology (PIR and ultrasonic) vacancy sensor to control lighting in commercial spaces.
Overview:
As part of our endeavour to deliver professional lighting and control solutions for the entire enterprise, Crestron is pleased to offer STEINEL PROFESSIONAL products, which are available for sale through authorized Crestron Commercial Lighting system integrators.
Based in Germany, STEINEL PROFESSIONAL has been manufacturing lighting controls for over 25 years. Their product offering includes a wide variety of controls and sensors for indoor and outdoor applications.
The DT VS 1 is a line voltage, single relay, Dual Technology (PIR and ultrasonic) vacancy (manual ON) sensor intended to control lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to maintain the load ON with either or both technologies. The convenient “Switch Link” feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multiway switching.
The typical application is for small offices, conference rooms and break rooms where vacancy control (manual ON only) is desired. For best performance use this sensor in enclosed spaces no larger than 20' x 16'.
- PIR and 40 kHz ultrasonic vacancy sensor
- Trigger mode settings enable what sensing technologies are used to keep the load ON
- Adjustable ultrasonic reach setting from 25% to 100%
- Line voltage lighting control (120/230/277VAC, 50/60Hz)
- 180° Coverage pattern
- Mounts to a single-gang NEMA-style, standard switch box and decorator-style wall plate by others
- Switch link communication allows for up to 4 sensors to be grouped together
- IQ Mode dynamically adjusts the ‘ON’ time delay by learning individual room occupancy
- Walk through mode option will switch the load OFF in 3 minutes if no additional detection occurs after the first 30 seconds
- Audible alert feature provides an audible warning that the load will shut-OFF in 10 seconds unless additional motion is detected
- Visible alert feature provides a momentary OFF/ON blink, warning that the load will shut OFF in 10 seconds unless additional motion is detected
- Re-trigger feature allows the load to turn back ON automatically if motion is detected within 30 seconds after it has automatically switched off the load
- ROHS Compliant - Yes
- Sensor Type - Occupancy/Vacancy
- Systems Controlled - Lighting
- Depth: 1.78 in
- Height: 4.13 in
- Switching: Performed at, or close to the zero-cross of the AC waveform in order to improve relay performance
- Width: 1.74 in
- Load Rating: tungsten, magnetic or electronic ballast: 0-800 watts at 120/230/277 VAC, 50/60 Hz, CFL or LED electronic ballasts: 0-600 watts at 120/230/277 VAC, 50/60 Hz, 1/6 hp at 120/230/277 VAC, 50/60 Hz
- Sustainability Rating: IP20
- Certifications: UL
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- AC Voltage (Minimum): 120 Volts
- AC Voltage (Maximum): 277 Volts
- Dip Switch Settings: Walk Through Mode: Switch the load OFF in 3 minutes if no additional detection occurs after the first 30 seconds, Audible Alert: Provides an audible warning that the load will shut-OFF in 10 seconds unless additional motion is detected, Visible Alert: Provides a momentary OFF/ON blink, warning that the load will shut OFF in 10 seconds unless additional motion is detected
- Sensing Technologies: 40 kHz ultrasonic and passive infrared
- Ultrasonic Coverage at 1.2 m / 4 ft Mounting Height: minor motion: max. 8 x 8 m (64 sq.m.), max. 18 x 12 ft (216 sq.ft.), radially: max. 7 m (77 sq.m.) 24 ft (904 sq.ft.), tangentially: max. 7 m (77 sq.m.) 24 ft (904 sq.ft.)
- PIR Coverage at 1.2 m / 4 ft Mounting Height: minor motion: max. 6.5 x 5.5 m (36 sq.m.), max. 21 x 18 ft (378 sq.ft.), radially: max. 7 m (77 sq.m.) 24 ft (904 sq.ft.), tangentially: max. 20 m (628 sq.m.) 54 ft (4,500 sq.ft.)
- Time Setting: IQ/Test, 5, 15, 30 minutes, IQ Mode: Dynamically adjusts the 'ON' time delay by learning individual room occupancy, Test Mode: Time delay defaults to 5 seconds and all loads are switched on/off by motion detection, After 5 minutes the time delay reverts to the IQ Mode
- Reach Setting: Adjustable from 25 percent to 100 percent
- Service mode: Deactivates the automated functions of the sensor and the load is only manually controlled using the ON/OFF button
- Trigger Mode (maintain and re-trigger): The end-user can choose which technology type of detection that will reset the time delay (maintain), and the type of detection that will cause the sensor to be turned back On immediately after lights turned Off due to lack of motion (re-trigger), Factory Default Setting: Detection by either technology will maintain lighting on, and detection by either technology will turn lights back on after lights were turned off for 30 seconds or less
- Switch Link: Allows communication of sensors for 2-way, 3-way, and 4-way switching
- Real-time motion indicator LED: Visible from the front of unit while in test mode
- Color: White
GLA-DT-WLS-DIM-BK
- Steinel DT WLS DIM 0-10V Dimming Dual Technology Wall Switch Occupancy Sensor, Black
GLA-DT-WLS-DIM-GY
- Steinel DT WLS DIM 0-10V Dimming Dual Technology Wall Switch Occupancy Sensor, Gray
GLA-DT-WLS-DIM-LA
- Steinel DT WLS DIM 0-10V Dimming Dual Technology Wall Switch Occupancy Sensor, Light Almond
GLA-DT-WLS-DIM-W
- Steinel DT WLS DIM 0-10V Dimming Dual Technology Wall Switch Occupancy Sensor, White
GLA-IR-WLS-DIM-BK
- Steinel IR WLS DIM 0-10 V Passive Infrared Dimming Wall Switch Occupancy Sensor, Black
GLA-IR-WLS-DIM-GY
- Steinel IR WLS DIM 0-10 V Passive Infrared Dimming Wall Switch Occupancy Sensor, Gray
GLA-IR-WLS-DIM-LA
- Steinel IR WLS DIM 0-10 V Passive Infrared Dimming Wall Switch Occupancy Sensor, Light Almond
GLA-IR-WLS-DIM-W
- Steinel IR WLS DIM 0-10 V Passive Infrared Dimming Wall Switch Occupancy Sensor, White
GLA-US-HALLWAY-DIM-24
- Steinel US HALLWAY DIM-24 Occupancy Sensor
Sensor
611106 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Avidex Industries, LLC
close
Avidex Industries, LLC
8509 154th Ave NE
Suite 100
Redmond, WA 98052
USA
(425)643-0330
www.avidex.com
Contact in regards to this product:
Crestron Electronics, Inc.
Model: GLA-DT-VS-1-W
Request more information from a dealer near you
close
Request more information from a dealer near you