Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
8 Channel Dimmer Module, 2 Feeds - International Version, 230V
Series: CLXI
Model: CLXI-2DIM8
Part #: 6500179
- Button setup is used for manual channel activation and TSID
- Green LED indicators indicates line power is applied to LINE terminal
- Yellow LED indicators indicates communication with control system
- Red x4 LED indicators indicates state of each channel
- Red LED indicators indicates unit is in setup/manual mode
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
Accessories
Lighting control dimmer module provides 8 channels of dimming for 230V incandescent, magnetic low-voltage, neon/cold cathode and dimmable 2-wire fluorescent loads. It is actually composed of two independent 4-channel dimmers in a single module. Each channel is rated for 2300W, with a total module rating of 5980W when fed from two separate 16A feeds. Air-gap relays are provided on every channel output allowing individual circuits to be serviced without disabling the entire module. CLXI-series dimmers are rigorously built using 40A triacs and oversized heat sinks for ultimate reliability. Split-bobbin transformers and ground referenced electronics deliver superior performance. Lamp flicker is minimized through Crestron's innovative zero-crossing detection technique backed by proprietary firmware. Low-maintenance convection cooling assures quiet and trouble-free operation.
- Button setup is used for manual channel activation and TSID
- Green LED indicators indicates line power is applied to LINE terminal
- Yellow LED indicators indicates communication with control system
- Red x4 LED indicators indicates state of each channel
- Red LED indicators indicates unit is in setup/manual mode
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Depth: 3.43 in
- Height: 7.59 in
- Width: 6.92 in
- Product Weight: 4.50 lbs
- Load Rating Module Total: 26 A (5980W)
- Load Types: Incandescent, Magnetic Low-voltage, Neon/Cold Cathode, Dimmable 2-Wire Fluorescen
- Module Interconnect: (2) 5-pin 0.156 inch headers
- Line Connections via CLTI or CLTIBN: (1) DIN rail terminal block, brown, line power input
- DIM Connections via CLTI or CLTIBN: (4) DIN rail terminal blocks, red, channel outputs
- Neutral Input Connections via CLTI or CLTIBN: (1) DIN rail terminal block, blue, line input neutral
- Neutral Output Connections via CLTI or CLTIBN: (4) DIN rail terminal blocks, blue, channel output neutrals
- Power Requirements: 230Vac, 50/60Hz, single-phase
- Heat Dissipation: 148 BTU/hr (Maximum load)
- AC Voltage: 230 Volts
CLX-1DIMU4-HP
- 4-channel 1-feed Universal Dimmer Module, High Power, 120V
CLX-2DIM8
- 8-channel 120V Dimmer Module, 2 Feeds
DIN-2LEDPWM8
- 2 Channel RGBW LED Dimmer, DIN Rail Mount
Dimmer Module
486 kb
- Data Sheet
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Avidex Industries, LLC
close
Avidex Industries, LLC
8509 154th Ave NE
Suite 100
Redmond, WA 98052
USA
(425)643-0330
www.avidex.com
Contact in regards to this product:
Crestron Electronics, Inc.
Model: CLXI-2DIM8
Request more information from a dealer near you
close
Request more information from a dealer near you