Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
1RU Digital Zone Manager
Series: Atlas
Model: IED5404DZM
- Management of 4 Individual output channels
- 4 Audio inputs via Dante audio networking (high quality over Ethernet)
- Redundant Ethernet ports
- Provides backup amplifier switching
- Fully supervises amplifier and speaker lines
Compare
Project List
Product Info
Tech Specs
Documents
The 5404DZM Digital Zone Manager provides processing and management of four (4) paging zones assigned from an IED 5400 Announcement Control System. It also provides line level audio outputs to a paired four-channel amplifier unit. Digital Signal Processing (DSP) is provided on each of the four (4) output channels. This includes: input level controls, paging routing, automatic ducking of background music, equalization (high pass filters, low pass filters, up to 40 milliseconds of delay, plus up to 7 parametric bands per amplifier channel). IED’s patented ambient analysis and control provides automatic level adjustment with two (2) Sensor Input Channels per amp channel.
Front Panel Features
Frame Status Indicators:
Fault (yellow)
Ground Fault (yellow)
Power (green)
Power Save Mode (yellow)
Announce/Alarm (green/red)
Lamp Test Button
Indicators for each Amp Channel:
Amp Status: Power (green), Fault (yellow) or Alarm Active (red)
Speaker Line Fault (yellow triangle)
Backup Amp Engaged (green square)
Mechanical/Electrical Features
Low-power processor for high reliability and long life with minimal cooling requirements
Powered from 12-24 VDC power input, such as an EN54-4 power supply
Requires 1 rack unit of 19” rack space
The 5404DZM provides backup amplifier switching by switching up to four (4) loudspeaker loads from a primary power amplifier to a backup when a failure is detected. It also contains integrated supervision that monitors each signal path and reports any failures to the 5400ACS.
The mainframe requires one (1) rack unit (1.75”) of vertical space in a 19” equipment rack/cabinet. All cooling is front to back.
- Management of 4 Individual output channels
- 4 Audio inputs via Dante audio networking (high quality over Ethernet)
- Redundant Ethernet ports
- Provides backup amplifier switching
- Fully supervises amplifier and speaker lines
- Provides ambient analysis and compensation with 8 sensor input channels
- DSP processing for 4 amplifier channels:
- Low and high pass filters
- 7-Band parametric EQ filters
- Up to 40 milliseconds of delay
- Rackmountable - Yes
- Dante Enabled - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Active Power: 15.70 Watt
- Current Draw: 2 Amps
- DC Voltage: 24 Volts
- Depth: 12.25 in
- Height: 1.75 in
- Width: 17.20 in
- Product Weight: 10.15 lbs
- Color: Black
- Recommended Operating:
- Conditions: 24 VDC @ 0.65 Amps
- Rated Input Current: 2 Amps Max (24W)
- Fault Relay Contact Rating: 2 Amps @ 110 VDC Max
- Backup Amplifier Inputs: 500 Watts Max / Channel
- Main Amplifier Inputs: 500 Watts Max / Channel
- Speaker Outputs 500 Watts Max / Channel
- Ambient Sensor Channels:
- Sensor Supply Voltage: 27 VDC Max @ 1W for 8 total sensors
- Channel Sensor Input Voltage: 0 – 24 VDC @1 mA for each input
- Battery Logic Input:
- OFF BATTERY: 0.8 VDC Max or Closed
- ON BATTERY: 2 VDC – 3 VDC Max or Open
- 24V Fault Logic Input:
- 24 VDC FAULT: 0.8 VDC Max or Closed
- 24 VDC GOOD: 2 VDC – 3 VDC Max or Open
- Amp On/Off Pulse Output:
- AMP OFF: -12 VDC @ 0.08 Amps for 0.02 Secs.
- AMP ON +12 VDC @ 0.08 Amps for 0.02 Secs.
- Amp Channel Fault Logic Input:
- AMP FAULT: 0.8 VDC Max or Closed
- AMP GOOD: 2 VDC – 3 VDC Max or Open
- Recommended Mounting Depth: 18" (45.7 cm)
- Storage Temperature Range: -4°F – +158°F (-20°C – +70°C)
- Connectors:
- Power: 2-pin Phoenix, 3.81 mm spacing with locking screws
- Redundant Ethernet (2): Control and Digital Audio (100 Mbps) RJ-45
- Ambient Sensors (8): 3-pin Phoenix, 3.81mm spacing
- Form C Fault Relay: 3-pin Phoenix, 3.81mm spacing
- Amplifier Audio Outputs (4): 3-pin Phoenix, 3.81mm spacing
- Amplifier Channel Faults (4): 3-pin Phoenix, 3.81mm spacing
- Main Amplifier Inputs (4): 2-pin Phoenix, 5.08mm spacing
- Backup Amplifier Inputs (4): 2-pin Phoenix, 5.08mm spacing
- Speaker Outputs (4): 2-pin Phoenix, 5.08mm spacing
Zone Manager
570 kb
- Data Sheet
Project List
Request Quote
Suggested Products
by
Lowell Manufacturing Co.
Thank you!
Someone will be in touch with you shortly.
Contact Avidex Industries, LLC
close
Avidex Industries, LLC
8509 154th Ave NE
Suite 100
Redmond, WA 98052
USA
(425)643-0330
www.avidex.com
Contact in regards to this product:
AtlasIED
Model: IED5404DZM
Request more information from a dealer near you
close
Request more information from a dealer near you