Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Bodypack Set, Cardioid Mic 488-524 MHz
Model: RE3-BPCL-5L
- RE3-ACC-CL3:
- Ideal for general sound reinforcement and
- presentations
- Cardioid polar pattern rejects ambient sounds and increases gain before feedback
- Delivers full and accurate sound
Compare
Project List
Product Info
Tech Specs
Documents
Bodypack UHF wireless set featuring CL3 cardioid lavalier microphone for voice performance and presentations. The CL3 a robust, general-purpose lavalier microphone. It is ideal for presentation and public speaking where its full and accurate sonic characteristics, coupled with its feedback-rejecting cardioid polar pattern deliver a clear and intelligible voice.
Setup is quick and simple using the RE3 clear frequency scan and sync functions, and the radio link between the robust bodypack transmitter and diversity receiver delivers rock-solid system performance.
- RE3-ACC-CL3:
- Ideal for general sound reinforcement and
- presentations
- Cardioid polar pattern rejects ambient sounds and increases gain before feedback
- Delivers full and accurate sound
- Wide dynamic range and frequency response
- Clothing clip holds microphone securely and attaches easily to garments
- RE3-BPT:
- Robust metal body
- Up to 36 MHz tuning bandwidth (band specific)
- Selectable low and high output power (band specific)
- Unique magnetic latch and lock for easy access to batteries
- Sync function for easy frequency setup
- RE3-RX:
- Diversity reception minimizes dropouts
- Up to 36 MHz tuning bandwidth (band specific) for trouble-free operation
- Easy-to-read LCD display
- Frequency scanning for selecting open frequencies
- Sync function links transmitter to receiver for easy setup
- Includes:
- CL3 Cardioid Lavalier Microphone
- RE3-BPT Bodypack Transmitter
- RE3-RX Diversity Receiver
- Spec Sheet available - Yes
- Spec Sheet available - Yes
- Spec Sheet available - Yes
- RE3-ACC-CL3:
•Element type: Self-biased condenser
•Frequency response: 100 Hz - 15 kHz
•Polar pattern: Cardioid
•Sensitivity: open circuit voltage. 1 kHz: 20 mV/Pascal (-34 dBV/PA)
•Maximum SPL: 115 dB SPL
•Impedance: 3700 ohms
•Power requirements: 3-9 VDC
•Polarity: Positive pressure on diaphragm produces positive voltage at pin 2 relative to pin 1
•Electrical contact pinouts: Pin #1 - Ground, shield; Pin #2 – Audio; Pin #3 - Bias voltage; Pin #4 - N/C
•Dimensions (cable length) : 56.3" (1430 mm)
•Dimensions (head length) : 1.04" (26.4 mm)
•Dimensions (head diameter) : 0.4" (10.1 mm)
•Net weight: 0.758 oz (21.5 g)
•Shipping weight: 6.35 oz (180 g)
•Microphone connector: 4-pin mini plug
•Head finish: Non-reflecting black
•Material: Die cast aluminum, steel wire cloth grille, black flexible PVC cable - RE3-BPT:
•Frequency oscillation mode: Phase-locked loop (PLL)
•Sync frequency: Ultrasonic
•RF power output: 5L (488-524MHz): Low 10mW/High 50mW
•Display by: LCD + LED
•Function controls: Power, mute, group, channel, frequency, sensitivity adjustment, input level attenuation, RF power, auto off, key lock
•RF stability: <±10kHz at Fc
•Modulation frequency shift: Wideband FM ±48kHz deviation
•Harmonic radiation: <-50dBc
•Input jack: 4-pin mini jack
•Battery: 2 x AA alkaline battery or NiMH rechargeable battery
•Charging contacts: Yes
•Finish: Black polyurethane paint
•Dimensions (without antenna): Height: 3.2 in. (81.5mm); Width: 2.54 in. (64.5mm); Depth: 0.98 in. (25mm)
•Net weight: 6.14 oz. (0.174 kg)
•Gross weight: 8.29 oz. (0.235 kg) - RE3-RX:
•Frequency oscillation mode: Phase-locked loop (PLL)
•Carrier frequency range: 470 - 865 MHz (tuning bandwidth is band dependent) Band names, tuning bandwidths, and carrier
•Sync frequency: Ultrasonic 40 kHz
•Diversity: Antenna diversity
•Bandwidth: 36MHz
•Signal/Noise ratio: >100dB(A)
•Total harmonic distortion (Thd): <0.6% at 1kHz
•Receiving sensitivity: -81dBm for -12dB SINAD
•Frequency response: 63Hz~16kHz±2dB (BPT) 51Hz~16kHz±2dB (HHT)
•Antenna type: Detachable ½ wave with BNC connector
•Antenna booster power: DC12 - 15V/100mA
•Function display by: LCD
•Contents of display: Group, channel, frequency, antenna A/B, transmitter battery level, transmitter status (mute, live, or no sync), output level attenuation, AF indication, RF indication, key lock indicator
•Sync data options: Frequency, group, channel, sensitivity level, attenuation status, RF power, auto off status, key lock status, transmitter display (freq or Gp/Ch)
•Audio frequency output level: Ref: 22.5kHz Dev at 1kHz Tone
•1/4 inch(6.3mm) Phone Jack: -10dBV XLR
•Jack: -4dBV(Line), -24dBV(MIC)
•Audio frequency output impedance: 240OHMS (unbalanced) 1400OHMS (balanced)
•Squelch and noise muting: Noise muting and tone code locking
•Output ports: 1 x balanced XLRM jack, 1 x unbalanced 1/4 inch TS (6.3mm) jack
•Power supply: DC12~15V/500mA
•Finish: Black polyurethane paint
•Dimensions: Width: 8.27 in. (210mm); Height: (with feet attached) 1.85 in. (47mm); Height: (without feet attached) 1.73 in. (44mm); Depth: (including antenna jack) 6.89 in. (175mm); Depth: (not including antenna jack) 6.1 in. (155mm)
•Net weight: 2.71 lb (1.23 kg)
•Gross weight: 3.28 lb (1.49 kg)
UHF wireless set
1067652 kb
- Data Sheet
Project List
UHF wireless set
1276624 kb
- Data Sheet
Project List
UHF wireless set
1224267 kb
- Data Sheet
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Avidex Industries, LLC
close
Avidex Industries, LLC
8509 154th Ave NE
Suite 100
Redmond, WA 98052
USA
(425)643-0330
www.avidex.com
Contact in regards to this product:
Electro-Voice (Bosch Communications)
Model: RE3-BPCL-5L
Request more information from a dealer near you
close
Request more information from a dealer near you