DigitalMedia Ultra Midspan PoDM++ Injector
Model: DM-PSU-ULTRA-MIDSPAN
Part #: 6507998
- Powers one or two PoDM-powered DM 8G+® devices[2]
- Supports PoDM+ and PoDM++ powered devices
- Simultaneously supplies up to 45 Watts from each port [1]
- Inserts midspan and supplies power to both endpoints
- Preserves the integrity of 4K video and 10 GB data signals
The Crestron® DM-PSU-ULTRA-MIDSPAN provides a single-point, midspan power injector for one or two PoDM-powered DM 8G+® devices. Its ability to deliver power in two directions without impacting the video or data signals passing through is unique in the industry. Its high-output power capacity of 45 Watts per port enables support for PoDM+ and PoDM++ powered devices including the Crestron TS-1542-C touch screen.
Bidirectional Power
The DM-PSU-ULTRA-MIDSPAN installs in line between two DM 8G+ devices and provides power to either or both of those devices. This allows a DM 8G+ transmitter and receiver, such as the DM-TX-4K-302-C and DM-RMC-4K-SCALER-C-DSP, to be paired together to form a custom point-to-point 4K signal extender, all powered from a single midspan power source. The use of a midspan power source with bidirectional powering capability eliminates the need for separate power supplies or electrical outlets at either endpoint.
2-Port PoDM++ Power Supply
For larger systems utilizing a DM-MD8X8, DM-MD16X16, or DM-MD32X32 switcher, the DM-PSU-ULTRA-MIDSPAN can be used to supply PoDM++ power to two DM 8G+ devices via their connections to the switcher. Instead of installing in line, each port on the DM-PSU-ULTRA-MIDSPAN can be connected to the POE IN port of a DMC-4K-C input card, DMC-4K-C-DSP input card, or DMC-4K-CO-HD output card. Doing so enables the powering of two separate devices, whether transmitters, receivers, or touch screens, through the DM port on each card. A maximum of 45 Watts is available at each port.
HDBaseT® Compatible
The DM-PSU-ULTRA-MIDSPAN is compatible with HDBaseT® Alliance specifications and may be used to supply power to IEEE 802.3at compliant HDBaseT PoE+ powered devices.
Mounting Options
The DM-PSU-ULTRA-MIDSPAN features integral mounting flanges to allow for surface mounting under a table, or attachment to a single rack rail. One or two units may also be installed in a single rack space using the optional rack mount kit (model ST-RMK, sold separately).
- Powers one or two PoDM-powered DM 8G+® devices[2]
- Supports PoDM+ and PoDM++ powered devices
- Simultaneously supplies up to 45 Watts from each port [1]
- Inserts midspan and supplies power to both endpoints
- Preserves the integrity of 4K video and 10 GB data signals
- Maintains full 300 ft (100 m) cable length end-to-end
- Also functions as a 2-port PoDM++ power supply for DMC I/O cards
- Compatible with HDBaseT® PoE+ powered devices
- Includes status indicators for basic troubleshooting
- No configuration or programming required
- Surface or under-table mountable
- Attachable to a single rack rail
- 1 RU rack mount kit option sold separately
- Rackmountable - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 220 Volts
- Active Power: 0.70 Watt
- Current Draw: 0.50 Amps
- Depth: 1.64 in
- Height: 6.06 in
- Width: 6.95 in
- Product Weight: 2.60 lbs
- Color: Black
- Connectors:
•G: (1) 6-32 screw
•Chassis ground lug
•100-240V~ 50/60Hz 1.0-0.5A: (1) IEC 60320 C14 main power inlet
•Mates with removable power cord, included
•PoDM++ 1 - 2: (2) 8-pin RJ45 female, shielded
•DM 8G+ pass-through ports(HDBaseT compatible)
•PoDM++ PSE ports (HDBaseT PoE++ compatible) - Indicators:
•PWR: (1 bottom/front, 1 top/rear) Green LEDs, each indicates main AC line power is connected and the unit is operating
•PoDM++ 1 - 2(bottom/front): (2) Green LEDs, each indicates the corresponding port is delivering power to the connected device
•PORT PWR 1 - 2 (top/rear): (2) Green LEDs, each indicates the corresponding port is delivering power to the connected device - Power:
•Power over DM (PoDM): IEEE 802.3at compliant PoDM++ PSE (Power Sourcing Equipment); each port supplies up to 45Watts to one PoDM (Class 0-3), PoDM+ (Class 4), or PoDM++ PD (Powered Device)
•Power over HDBaseT: IEEE 802.3at PoE++ compliant PSE (Power Sourcing Equipment); each port supplies up to 45 Watts to one HDBaseT PoE, PoE+, or PoE++ PD (Powered Device) - Environmental:
•Humidity: 10% to 90% RH (non-condensing)
•Heat Dissipation:
•41 BTU/hr maximum
•8.2 BTU/hr typical
•2.4 BTU/hr idle - Enclosure:
•Chassis: Metal, black finish, (2) integral mounting flanges, vented sides
•Mounting: Freestanding, surface mount, attach to a single rack rail, or 1 RU rack mount (ST-RMK rack mount kit sold separately)
Avidex Industries, LLC
8509 154th Ave NE
Suite 100
Redmond, WA 98052
USA
(425)643-0330
www.avidex.com