Active Two-Pair Sender, Twisted Pair Format-A, XLR Microphone & Stereo Mini-jack In
Model: DS-TPS2AM
- Mini-jack -10 dBV Stereo Line Input Summed to Mono
- MIC Feeds Pair A; Mini-jack Feeds Pair B
- Remote Powering through Twisted Pair Cable
- Fused Local Power Feeds all Connected Modules
- Local Power Input on Terminal Block
The D SERIES-TPS2AM modules are two-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources. The -TPS2AM models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPS2AM features a white front-panel laminate with gray lettering that matches RDL Decora©-style remote controls. The DB-TPS2AM features a black front-panel laminate. The DS-TPS2AM is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations.
APPLICATION: The D SERIES-TPS2AM modules features an XLR microphone input and a stereo Mini-jack input summed to mono. The unbalanced Mini-jack inputs are designed to receive standard -10 dBV consumer level signals. The microphone input provides 24 Vdc IEC phantom voltage and accepts both dynamic and condenser microphone signals. The input signals are amplified using studio-quality preamplifiers optimized for normal operating levels. A rear-panel GAIN switch is provided to set the amplification of the microphone preamplifier. This switch is normally set by the installer for NORM (normal) gain. If consistently low mic levels are expected, this switch may be set to the HIGH gain position. The pre-amplified microphone source is routed to pair A. The buffered Mini-jack input is routed to output cable pair B.
The D SERIES-TPS2AM may be powered directly from a 24 Vdc power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPS2AM may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.
RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.
- Mini-jack -10 dBV Stereo Line Input Summed to Mono
- MIC Feeds Pair A; Mini-jack Feeds Pair B
- Remote Powering through Twisted Pair Cable
- Fused Local Power Feeds all Connected Modules
- Local Power Input on Terminal Block
- Blue LED Indicates Module is Powered
- Utilizes Two Format-A Pairs
- Studio-Quality Precision Active Balanced Circuitry
- Spec Sheet available - Yes
- Crosstalk: Line to Line: < 90 dB (1 kHz); < 75 dB (20 Hz to 20 kHz); Line to Mic (HIGH Gain): < 65 dB (1 kHz), < 60 dB (20 Hz to 20 kHz);
- Depth: 1.89 in
- Frequency Response: Mic: 100 Hz to 30 kHz (+/- 1 dB); integral low-cut filter -10 dB @ 30 Hz; Line: 20 Hz to 50 kHz (+/- 0.5 dB)
- Gain: Mic: 50 dB (NORM) or 63 dB (HIGH), Switch-selectable on rear panel; Line: 12 dB
- Height: 4.11 in
- Output: RDL TP Format-A
- Width: 1.60 in
- Shipping Weight: 0.39 lbs
- Input Level: Mic: -45 to -65 dBu Balanced; Maximum: -40 dBu (HIGH Gain), -28 dBu (NORM Gain); Line: -10 dBV Unbal.; +8 dBV Max
- Indicator: Power In
- CMRR: Mic: > 60 dB (HIGH Gain 50 Hz to 150 Hz), > 65 dB (NORM Gain 50 Hz to 150 Hz)
- THD+N: Mic: < 0.1% (80 Hz to 20 kHz); Line: < 0.05% (20 Hz to 50 kHz); <0.005% (1 kHz)
- Output Connection: RJ45
- DC Voltage: 24 Volts
- Noise below +4 dBu: Mic: < -80 dB (NORM Gain), < -70 dB (HIGH Gain); Line: < -95 dB
- Headroom above +4 dBu: > 18 dB
- Mounting Box Minimum Depth: 2.4" (6.1 cm)
- Inputs (3): Mic: 1.2 kOhm Balanced with IEC 24 Vdc Phantom; Line (left and right): 10 kOhm Unbalanced
- Input Connectors (2): XLR female with gold contacts (1); Mini-jack (1)
- Format-A Signal Pairs Used (2): A (Mic); B (Unbal Line inputs, summed to mono)
- Product Weight: 0.25 lbs
- Operating Temperature (Maximum): 131 F
- Operating Temperature (Minimum): 32 F
- Current Draw: 0.07 Amps
- Tariff code: 8543.70.9960
- Line to Mic (NORM Gain): < 75 dB (1 kHz), < 70 dB (20 Hz to 20 kHz)
- ower Connections (2): Detachable terminal block; RJ45
Single Cover Plate - white
CP-1B
Single Cover Plate, Black
CP-1G
Single Cover Plate - gray
CP-1S
CP-1S Single Cover Plate, Stainless Steel
CP-2
Double Cover Plate - white
CP-2B
Double Cover Plate, Black
CP-2G
Double Cover Plate, Gray
CP-2S
CP-2S Double Cover Plate, Stainless Steel
CP-3
CP-3 Triple Cover Plate - white
CP-3B
Triple Cover Plate, Black
CP-3G
Triple Cover Plate, Gray
CP-3S
CP-3S Triple Cover Plate, Stainless Steel
CP-4
CP-4 Quadruple Cover Plate - white
CP-4B
Quadruple Cover Plate, Black
CP-4G
Quadruple Cover Plate, Gray
CP-4S
CP-4S Quadruple Cover Plate, Stainless Steel
DC-1B
Desktop or Wall Mounted Chassis, Holds 1 Decora-style Remote Controls and Panels, Black
DC-1G
Desktop or Wall Mounted Chassis for Remote Controls and Panels
DC-1W
Desktop or Wall Mounted Chassis for Remote Controls and Panels
DC-2B
Desktop or Wall Mounted Chassis, Holds 1/2 Decora-style Remote Controls and Panels, Black
DC-2G
Desktop or Wall Mounted Chassis for Remote Controls and Panels
DC-2W
Desktop or Wall Mounted Chassis for Remote Controls and Panels
DC-3B
Desktop or Wall Mounted Chassis, Holds 1/2/3 Decora-style Remote Controls and Panels, Black
DC-3G
Desktop or Wall Mounted Chassis for Remote Controls and Panels
DC-3W
Desktop or Wall Mounted Chassis for Remote Controls and Panels
DC-4B
Desktop or Wall Mounted Chassis, Holds 1/2/3/4 Decora-style Remote Controls and Panels, Black
DC-4G
Desktop or Wall Mounted Chassis for Remote Controls and Panels
DC-4W
Desktop or Wall Mounted Chassis for Remote Controls and Panels
RM-D3
19" Rack Mount for 3 Decora® Modules
SMB-1B
Surface Mount Box for Decora® Remote Controls and Panels, 2.88" Width, Black
SMB-1G
Surface Mount Boxes for Remote Controls and Panels
SMB-1W
Surface Mount Boxes for Remote Controls and Panels
SMB-2B
Surface Mount Box for Decora® Remote Controls and Panels, 4.69" Width, Black
SMB-2G
Surface Mount Boxes for Remote Controls and Panels
SMB-2W
Surface Mount Boxes for Remote Controls and Panels
SMB-3B
Surface Mount Box for Decora® Remote Controls and Panels, 6.62" Width, Black
SMB-3G
Surface Mount Boxes for Remote Controls and Panels
SMB-3W
Surface Mount Boxes for Decora® Remote Controls and Panels
SMB-4B
Surface Mount Box for Decora® Remote Controls and Panels, 8.43" Width, Black
SMB-4G
Surface Mount Boxes for Remote Controls and Panels
SMB-4W
Surface Mount Boxes for Decora® Remote Controls and Panels
WB-1U
Universal Wall Box, Single
WB-2U
Universal Wall Box, Double
Suggested Products
Avidex Industries, LLC
8509 154th Ave NE
Suite 100
Redmond, WA 98052
USA
(425)643-0330
www.avidex.com