Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
RS-232 Isolator
Model: CSP-RS232I
Part #: 6501814
- Recommended for lengthy or outdoor RS-232 cable runs
- Protects control systems from lightning strikes and electrical disturbances
- Supports RS-232 from 300 to 115.2k baud
- Passes RX, TX, RTS, and CTS signals
- 4.5 Kilovolt RMS galvanic isolation
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
The CSP-RS232I is an accessory designed to protect a Crestron® control system's COM ports from lightning surges and other electrical disturbances brought through the RS-232 control line[1]. By electrically isolating any distant, outdoor device such as a pool & spa controller or irrigation system, the CSP-RS232I can prevent damage to the control system in the event of a near lightning strike, ground-loop, or short from a high voltage line.
- Recommended for lengthy or outdoor RS-232 cable runs
- Protects control systems from lightning strikes and electrical disturbances
- Supports RS-232 from 300 to 115.2k baud
- Passes RX, TX, RTS, and CTS signals
- 4.5 Kilovolt RMS galvanic isolation
- Systems Controlled - Other
- Spec Sheet available - Yes
- Depth: 3.76 in
- Height: 1.34 in
- Width: 4.52 in
- DC Voltage: 24 Volts
- Operating Temperature (Maximum): 158 F
- Operating Temperature (Minimum): 32 F
- Product Weight: 0.57 lbs
- Protection:
- Isolation: 4.5 KilovoltsRMSfor 1 minute
- Connectors:
- DEVICE:
- (1) DB9 male, isolated bidirectional RS-232 pass-through port[1]
- Passes RX, TX, RTS, and CTS signals
- Supports 300 to 115.2k baud
- Ground: (1) 6-32 screw, chassis ground lug
- CONTROL SYSTEM:
- (1) DB9 female
- Connection to any Crestron COM port[1]
- 6 ft (1.83 m) interface cable included
- PWR 24VDC:
- (1) 2-pin 3.5mm detachable terminal block
- 24 Volt DC power input
- May be connected to a Cresnet®network or dedicated power supply (not included)
- PWR 12VDC:
- (1) 2.5mm barrel DC power jack
- 12 Volt DC power input
- (PW-1205 or PW-1205RU power pack sold separately)
- DEVICE:
- Indicators:
- PWR: (1) green LED, indicates power supplied via Cresnet network or local power pack
- Power requirements:
- Power Pack:
- 0.5 Amp @ 12 Volts DC
- For use with Crestron model PW-1205 (120V) or PW-1205RU (100-240V) power pack, each sold separately
- Cresnet Power Usage: 1 Watt (0.04 Amp @ 24 Volts DC) with no power pack connected
- Power Pack:
- Environmental:
- Humidity: 10% to 90% RH (non-condensing)
- Heat Dissipation: 3 BTU per hour
- Enclosure: Steel, surface mount box with (2) integral mounting flanges, printed label
- NOTES:
- Supports RS-232 only; does not support RS-422 or RS-485.
Isolator
872 kb
- Data Sheet
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Avidex Industries, LLC
close
Avidex Industries, LLC
8509 154th Ave NE
Suite 100
Redmond, WA 98052
USA
(425)643-0330
www.avidex.com
Contact in regards to this product:
Crestron Electronics, Inc.
Model: CSP-RS232I
Request more information from a dealer near you
close
Request more information from a dealer near you