Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
D-RT2 Remote Control Selector
Series:
Model: D-RT2
- Remote Selection of ON or OFF
- Single-Button Selection for Each Function
- Open-collector Switching
- 3-wire or 4-wire Remote Wiring
- Professional Aesthetic Appearance
Compare
Project List
Product Info
Tech Specs
Documents
The front panel of the D-RT2 features two pushbuttons with two associated LEDs. Upon initial power-up, the OFF mode is selected. Touching the other button de-selects OFF and immediately selects ON. An LED adjacent to each button shows which mode is selected.
In a typical installation, the D-RT2 may be used to turn an audio or video source on or off. To turn on an audio source, the D-RT2 may be connected to an RDL ST-SSR1 or ST-RX2 Solid-State Audio Switch. For video switching, an RDL TX-MVX may be used. In each of the above examples, only one output terminal is needed for triggering, therefore a single shielded pair (3-conductor cable) is required for remote connection. For more complex switching networks, both outputs (ON and OFF) may be used. In an audio or video control installation, the D-RT2 may be mounted adjacent to an RDL remote volume control, such as the RLC2, RLC3 or RLC10K.
In installations where ULTRASTYLE™ wall controls are preferred, use the RUC-4 Universal Remote.
- Remote Selection of ON or OFF
- Single-Button Selection for Each Function
- Open-collector Switching
- 3-wire or 4-wire Remote Wiring
- Professional Aesthetic Appearance
- Companion to other RDL® Remote Controls
- LED Indication
- Spec Sheet available - Yes
- Selectors (2):: Momentary pushbuttons, (1 for ON, 1 for OFF)
- Indicators (2):: Green/Red LEDs, (indicates status ON or OFF respectively)
- Connections:: Detachable terminal block; Power input; Separate open-collector outputs for ON and OFF (25mA max.)
- Ambient Operating Environment:: 0° C to 55° C
- Power Requirement:: GROUND-REFERENCED, 24 Vdc @ 30 mA
- Mounting:: Mounts in standard US electrical box, RDL WB- or SMB- series boxes; cover plate available separately
- Package Type:: Cardboard Box
- Shipping Weight:: lbs.
- Package Dimensions:: 3.625 x 4.625 x 2.125 in.
db-rt2[1]1.pdf
849 kb
- Data Sheet
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Avidex Industries, LLC
close
Avidex Industries, LLC
8509 154th Ave NE
Suite 100
Redmond, WA 98052
USA
(425)643-0330
www.avidex.com
Contact in regards to this product:
Radio Design Labs
Model: D-RT2
Request more information from a dealer near you
close
Request more information from a dealer near you