40W Network to Stereo Power Amplifier
Model: SF-NP40D
- Converts two Dante network audio signals to two 20W outputs into 8 ohms
- Selectable Dante sample rates - 44.1kHz, 48kHz, 88.2kHz and 96kHz
- 0dBFS Input for 20W per channel into 8 ohms or 15W per channel into 4 ohms
- Special software not required for module setup
- LED indicator for network sync
The SF-NP40D is an audio power amplifier that converts two Dante network audio channels to two 4 or 8 ohms amplified outputs. Each output provides 20 watts into 8 ohms for a network digital audio level of 0 dBFS. Special software is not required to configure the module.
A front-panel blue LED illuminates when the SF-NP40D is powered from its included external 24 Vdc power supply. The module is equipped with both thermal and output short-circuit protection. The high-efficiency Class D output stages produce minimal heat for all levels of expected voice or music modulation. Valid synchronization to the Dante network is indicated by a green LED visible from the front of the unit.
The SF-NP40D is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured SYSFLEX product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The versatility of SYSFLEX products adds enormous flexibility in the design and installation of professional A/V systems.
- Converts two Dante network audio signals to two 20W outputs into 8 ohms
- Selectable Dante sample rates - 44.1kHz, 48kHz, 88.2kHz and 96kHz
- 0dBFS Input for 20W per channel into 8 ohms or 15W per channel into 4 ohms
- Special software not required for module setup
- LED indicator for network sync
- High-efficiency class D operation
- Thermal and short-circuit protection
- SF-NP40D includes North American cord, SF-NP40DE excludes power cord
- Dante Enabled - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Impedance: 8 ohm
- Power Handling: 40 Watt
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Current Draw: 1.30 Amps
- DC Voltage: 24 Volts
- Depth: 5.77 in
- Height: 1.68 in
- Width: 3.51 in
- Product Weight: 1.77 lbs
- Shipping Weight: 2 lbs
- Network Connector: RJ45 with Link and Speed indicators
- Digital Audio Ethernet Protocol: Dante
- Transmission Rate: 100 Mbps
- Sample Rates supported: 44.1, 48 (default), 88.2, 96 kHz
- Bit Depth Supported: 24 bits
- Reference Level: 0dBFS = 20W into 8-ohm
- Outputs (2): Balanced, detachable terminal block
- Output Level (maximum): 0dBFS = 20W into 8-ohm per channel, 15W into 4-ohm
- Load Impedance: 4 or 8-ohm, switch-selectable
- THD+N: < 0.1% (20Hz to 20kHz, +4dBu/-20dBFS), 0.015% at 1 kHz (typ)
- Noise: < -80dB (below 20W/8-ohm)
- Crosstalk: < -75dB (1kHz, output to output)
- Headroom above -20dBFS: 20dB
- Indicators (3): Ethernet Link and Speed (2, rear panel), Sync (front panel)
- Specification Conditions: Gain/Level: +/- 1 dB
- Package Type: Cardboard Box
- Package dimensions: 6 x 6 x 2.625 inch
- Tariff code: 8517.18.0050
Suggested Products
Avidex Industries, LLC
8509 154th Ave NE
Suite 100
Redmond, WA 98052
USA
(425)643-0330
www.avidex.com