Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Stationary RF Receiver/Power Amplifier (216 MHz)
Series: FM
Model: LR-100-216
- Superior audio quality - 80 dB signal-to-noise ration, setting the industry's sound quality standard
- A choice between 57 programmable channels
- Look&Listen LCD Display
- Adjustable squelch control
- Selectable audio output
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
Listen's LR-100 Stationary Receiver / Power Amplifier is a stationary auditory assistance receiver with a built-in power amplifier. When used with a Listen transmitter, the LR-100 can deliver high quality audio for use in a variety of locations. The built-in 15 watt power amplifier (15 peak/ 10 RMS) can be used to either amplify the receiver audio, or it can be used independently. The LR-100 also has Listen's standard 57 channels, 100% digital tuning, and can be rack mounted. Comes with a rear mounted, 90 Degree Helical Antenna (LA-123 or LA-124).
- Superior audio quality - 80 dB signal-to-noise ration, setting the industry's sound quality standard
- A choice between 57 programmable channels
- Look&Listen LCD Display
- Adjustable squelch control
- Selectable audio output
- Multiple input options
- Wireless Receiver Transmission - FM
- RF Frequency Range - 216 MHz: 216.025 - 216.975 MHz
- Number of Channels - 216 MHz: 57 (19 wide, 38 narrow)
- Frequency Accuracy: ± .005 % stability 0 to 50 degree C (32 to 122 degree F)
- Antenna - 216 MHz: Flexible helical, 5.5 in (14 cm) included
- Antenna Connector: BNC
- Squelch: Continuously adjustable via front panel trim pot
- Compliance: FCC Part 15, Industry Canada
- System Frequency Response - 216 MHz: 63Hz - 10kHz (±3dB)
- System Signal-to-Noise Ratio (A-weighted) - 216 MHz: SQ enabled: 80dB; SQ disabled 50dB
- System Distortion: <2% total harmonic distortion (THD) at 80% deviation
- Auxiliary Input to Output: Frequency Response: 25Hz to 20kHz (±3dB), SNR: >80dB, Distortion: <0.2%
- Balanced Auxiliary Input: Rear panel. One Female XLR-1/4 in combo connector, balanced, 0dBu nominal input level adjustable, +13dBu maximum, impedance 600 Ohms
- Unbalanced Auxiliary Input: Rear panel. Two Phono connectors, unbalanced, -10dBu nominal input level adjustable, +7dBu maximum, impedance 10k Ohms
- Balanced Output: Rear panel. One Male XLR, balanced, 0dBu nominal output level, +16dBu maximum, impedance 2k/10 Ohms (line/mic)
- Unbalanced Output: Rear panel. Two Phono connectors, unbalanced, -10dBu nominal output level, +2dBu maximum, impedance 2k Ohms
- Headphone Output: Front panel. One 3.5mm stereo connector, unbalanced, adjustable output level, +16dBu maximum, impedance 32 Ohms, 120mW
- Speaker Output: Rear panel, One detachable terminal block, bridged, adjustable output level, 15/10 watts (peak/RMS) continuous power with 4 Ohm load
- Set-up Controls, Front Panel behind Security Cover: Receive level, auxiliary input level, SQ on/off, squelch
- Set-up Controls, Back Panel: Audio output select (RX Only, RX + AUX, RX or AUX), Speaker (Output, Aux), switchable balanced output level
- User Controls: Volume, channel UP/DOWN, SEEK (all controls except volume are lockable)
- Remote Controls: Eight position detachable terminal block, channel up, channel down, mute
- Programming: Unit can be programmed so that only desired channels are displayed to the user, chaannel selection can be locked by holding the SEEK button 5 seconds
- VU Meter: Four LED (three green, one red)
- Power: Green LED illuminates when the unit is powered up
- LCD Display: Channel, RF signal strength, lock status, programming
- Squelch: Green LED illuminates when the unit is squelched
- Mute: Green LED illuminates when the output audio is muted
- Power Supply: Type In-line power supply, Listen part number LA-201
- Power Supply Input: 120VAC, 60 Hz, 19 watts (maximum continuous)
- Power Supply Output: 15VAC, 1A
- Power supply connector: .02 in OD x .01 in ID (5.0mm x 2.5mm), barrel type
- Compliance: UL Listed
- Optional Battery: 12VDC, connected via terminal block
- Optional Battery Charging: Trickle charge of optional 12VDC battery through terminal block
- Temperature - Operation: -10 to +40 Degree C (14 to 104 degree F)
- Temperature - Storage: -20 to +50 Degree C (-4 to 122 degree F)
- Humidity: 0-95 % relative humidity, non-condensing
- Rack Mounting: 1/2 rack unit (RU), optional rack mount not include, order Listen part number LA-326
- Width: 8 in 20.3 cm
- Depth: 8 in 20.3 cm
- Unit Weight: 2.8 lbs (1.3kg)
- Unit Weight with LA-201 Power Supply: 4.2 lbs (1.9kg)
- Regulatory Compliance: UL Listed
- Height: 1.75 in
- Shipping Weight: 5.60 lbs
LA-107
- Ground Plane Remote Antenna (216 MHz)
LA-112
- RG-58 50 Ohm Coaxial Cable (Per ft.)
LA-113
- RG-8 50 Ohm Low-Loss Coaxial Cable (Per ft.)
LA-116
- Coaxial Dipole Remote Antenna (72 MHz)
LA-117
- Coaxial Dipole Remote Antenna (216 MHz)
LA-122
- Universal Antenna Kit (72 and 216 MHz)
LA-123
- 90° Helical Antenna (72 MHz)
LA-124
- 90° Helical Antenna (216 MHz)
LA-125
- Antenna Kit for Rack Mount (72 MHz)
LA-126
- Antenna Kit for Rack Mount (216 MHz)
LA-127
- RG-58 BNC Connector
LA-128
- RG-8 BNC Connector
LA-201
- 15 VAC Replacement Power Supply for LT-800/LR-100
LA-304
- Assistive Listening Notification Signage Kit
LA-320
- Configurable Carrying Case
LA-326
- Universal Rack Mounting Kit
LT-800-216-01
- Stationary RF Transmitter (216 MHz)
LR-100 Stationary Receiver/Power Amplifier Data Sheet
191 kb
- Data Sheet
Project List
Project List
Request Quote
Suggested Products
by
Crestron Electronics, Inc.
Thank you!
Someone will be in touch with you shortly.
Contact Avidex Industries, LLC
close
Avidex Industries, LLC
8509 154th Ave NE
Suite 100
Redmond, WA 98052
USA
(425)643-0330
www.avidex.com
Contact in regards to this product:
Listen Technologies Corp.
Model: LR-100-216
Request more information from a dealer near you
close
Request more information from a dealer near you