JPEG 2000 1080p HD Low Latency Video over IP Decoder with KVM, PoE + SFP + HDMI/HDCP
Series: N2000
Model: NMX-DEC-N2235
- Design Flexibility-Compatible with all SVSI N2000 series products so designers can choose the right product for each end point
- Input and Output Scaling-Scaling performed in encoders or decoders for maximum flexibility with sources and displays
- Power Over Ethernet (POE) -Eliminates requirement for local power supply and speeds installation. Units can still be powered locally from 12VDC allowing for easy rack-mountable, high-density installations
- Infrared (IR) -Emitter connection allows control of IR-only display devices
- Fast Install-With Phoenix connectors for Power, IR, RS232 serial, and analog audio (balanced and unbalanced) interfaces
The SVSI JPEG2000 NMX-ENC-N2135 and NMX-DEC-N2235 encoder and decoder solution provides users with the industry’s most versatile solution for distributing AV over a converged network. JPEG2000 compression is the codec of choice for users demanding low-latency cinema grade HD quality video in their system. SVSI video over IP encoders are used to encode and distribute sources of almost any format onto an existing IP network making that stream available to any endpoint in the facility utilizing copper and/or fiber connectivity. SVSI Video over IP Decoders are used to decode Networked AV streams for display. With the ability to direct any source stream to any display, large, low-cost switching and distribution systems are simple to deploy without proprietary cabling or dedicated switching hardware. User selectable bandwidth control (10Mbps-600Mbps) allows for precision tuning considering network load and video quality.
The NMX-ENC-N2135 and NMX-DEC-N2235 both feature keyboard and mouse extension over IP. Users can set security options for device control. Security can be turned off allowing any decoder to connect to any computer connected to an encoder – for example within a call center where security of this type is not an issue and access to all end points is necessary. Security can be set allowing access to only specified computers or defined groups of computers – sensitive environments such as command and control centers benefit from this kind of customized security.
The SVSI solution allows for any number of inputs to connect to any number of outputs creating a video matrix of unlimited size and expandability. Plug-n-play, auto-detect technology reduces installation and programming time and all SVSI encoders and decoders include built in control capability.
- Design Flexibility-Compatible with all SVSI N2000 series products so designers can choose the right product for each end point
- Input and Output Scaling-Scaling performed in encoders or decoders for maximum flexibility with sources and displays
- Power Over Ethernet (POE) -Eliminates requirement for local power supply and speeds installation. Units can still be powered locally from 12VDC allowing for easy rack-mountable, high-density installations
- Infrared (IR) -Emitter connection allows control of IR-only display devices
- Fast Install-With Phoenix connectors for Power, IR, RS232 serial, and analog audio (balanced and unbalanced) interfaces
- Balanced and Unbalanced Audio-Embedded 7.1 audio (balanced and unbalanced)
- HDMI with HDCP-Pass protected HDMI content
- Multiple Connection Options-RJ-45 and SFP network connectors and HDMI video connections
- KVM-Single USB-B and Dual USB-A control for KVM applications
- Control Flexibility-Built-in or external control
- Decoder or Encoder Signal Type - Audio
- Decoder or Encoder Signal Type - Video
- Decoder/Encoder Type - Other
- Rackmountable - Yes
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Certifications: CE, FCC
- Input Signal Types: Ethernet
- Output (Decoded/Encoded) Signal Type: HDMI, DVI-D
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Current Draw: 2 Amps
- DC Voltage: 12 Volts
- Depth: 5 in
- Height: 1.05 in
- Width: 7.80 in
- Product Weight: 1.50 lbs
- Regulatory Compliance: HDCP
- Warranty (Length/Type): 3 Year Limited
- Video:
- Video Input: Network video over copper via RJ45 port or fiber via 1G SFP port
- Video Output: HDMI, DVI-D (through adapter)
- Formats: HDMI, DVI-D (through adapter), HDCP content protection support
- Input Resolutions
- HDMI and DVI (Progressive)
- Pixel clock between 27 MHz - 165 MHz
- Minimum resolution of 720x480p
- Maximum horizontal resolution of 1920 or a vertical resolution of 1200
- HDMI and DVI (Progressive)
- Audio:
- Input Signal Types: Network audio over Ethernet
- Output Signal Types: Embedded audio on HDMI or DVI-D (through adapter)
- HDMI Audio Formats: 8ch PCM
- Analog Audio Format: Stereo 2-channel
- Latency:
- 720p: 25 ms
- 1080p: 25 ms
- COMMUNICATIONS:
- Ethernet
- PO: 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP
- P1: 1 Gbps port which accepts compatible fiber transceivers or direct attach cables (fiber or copper cabling)
- HDMI: HDCP, EDID management
- Ethernet
- Ports:
- +12V 2A: One 12 Volt DC power input.
- P0:
- 8-wire RJ45 female.
- 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port
- Provides the network connection, network AV video, and power to the Encoders and Decoders
- p1:
-
SFP port (SFP fiber transceiver or direct attach cable not included)
Provides the network connection and network AV video
- IR:
-
2-pin terminal Phoenix connector
Provides Infrared (IR) output only (33-60 kHz; typically 39 kHz). Emitter may be necessary (not included).
- RS232:
-
3-pin terminal Phoenix connector
Provides a serial control interface. Full duplex communication. Available terminal speed settings: 9600-115200 baud rate
- Audio:
-
5-pin terminal Phoenix connector
Provides user-selectable balanced/unbalanced input. Dedicated audio input
- HDMI OUT: HDMI video output
- USB connectors (front panel): One USB-B and two USB-A control inputs
- CONTROLS AND INDICATORS - FRONT PANEL:
- RESET button
- Recessed pushbutton
- Press to initiate a 'warm restart' causing the processor to reset, but not lose power. A reset does NOT affect the current settings
- ID button
- Recessed pushbutton
- Press to send a notification out on the network to identify the unit (the notification causes a pop-up dialog in N-Able and N-Command)
- POWER LED
- On solid (green) when operating power is supplied (via PoE or local power supply)
- This activity is also shown by the PWR LED on the rear panel
- STATUS LED
- On flashing (green) when there is software activity
- This activity is also shown by the STAT LED on the rear panel
- RESET button
- CONTROLS AND INDICATORS — REAR PANEL:
- PWR LED: Same as POWER LED described above
- HDMI LED: On (green) when there is a connection to a valid video display
- STAT LED: Same as STATUS LED described above
- STRM LED: On (green) when the unit is streaming video
- Power Requirements:
- Power Supply, External, Optional: 2.0 Amp @ 12 Volts DC; 100-240 Volts AC power supply; optional. NMX-ACC-N9312 (FGN9312)
- Power over Ethernet (PoE), External, Optional: Can be powered via a PoE switch or other equipment with a PoE source. Conforms to IEEE 802.3af Class 3 (802.3at Type 1)
Warning: Do not run wiring that is connected to a PoE PSE port outside of the building where the PSE resides. It is for intra-building use only. PoE does not pass through the daisy chain (P1) port. - Humidity: 10 to 90 % RH (non-condensing)
- Heat Dissipation: Up to ~44 BTU/hr
- General:
- Mounting Options
- Stand alone, surface mount, wall mount, or rack mount
- Surface and wall mounting requires (not included): NMX-ACC-N9101 (FGN9101), Mounting Wings for SVSI N-Series Encoders, Decoders and Audio Transceiver
- Rack mounting requires one of the following (not included)
- NMX-ACC-N9102 (FGN9102), 1RU Rack Shelf for Two Side-by-Side SVSI N-Series Encoders, Decoders and Audio Transceiver
- NMX-ACC-N9206 (FGN9206), 2RU Rack Mount Cage with Power for Six SVSI N-Series Card Units
- Mounting Options
Suggested Products
Avidex Industries, LLC
8509 154th Ave NE
Suite 100
Redmond, WA 98052
USA
(425)643-0330
www.avidex.com