Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Ethernet to DMX Converter
Model: DIN-SACN-DMX
Part #: 6508214
- Converts between DMX512A and sACN, Art-Net, or ESP protocols
- Enables distribution of DMX over Ethernet or Wi-Fi®
- Enables Crestron® control of DMX lighting fixtures and systems
- Supports a single universe Ethernet to DMX node in output mode
- Supports a single universe DMX to Ethernet node in input mode
Compare
Project List
Product Info
Tech Specs
Documents
Simplifies integration between a Crestron® 3-Series® lighting control system and any DMX lighting fixture or controller. Enables distribution of DMX over Ethernet or Wi-Fi® via sACN, Art-Net, or ESP.
Overview:
The ENTTEC DIN-ODE POE Mk2 (sold by Crestron® as model DIN-SACN-DMX) is a cost-effective and reliable Ethernet to DMX convertor. It supports sACN, Art-Net, and ESP protocols, and is designed to enable integration between DMX and network controllable lighting devices and systems. As part of a Crestron architectural lighting system, it allows a 3-Series® control processor to communicate via sACN with any DMX lighting fixture or controller.
- Converts between DMX512A and sACN, Art-Net, or ESP protocols
- Enables distribution of DMX over Ethernet or Wi-Fi®
- Enables Crestron® control of DMX lighting fixtures and systems
- Supports a single universe Ethernet to DMX node in output mode
- Supports a single universe DMX to Ethernet node in input mode
- Supports broadcast or unicast (unicast in input mode only)
- Supports HTP/LTP merging of up to 2 DMX sources (output mode only)
- Supports RDM over Art-Net
- Easy web browser based setup and firmware update
- 4U 35mm DIN rail mountable
- PoE or 7-24VDC powered (power supply not included)
- DMX Control - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): 32 F
- Certifications: CE
- Depth: 2.24 in
- Height: 4.21 in
- Width: 2.71 in
- Product Weight: 0.46 lbs
- Protocols:
•Ethernet: sACN, Art-Net 3, ESP, RDM
•DMX: DMX512A - Connectors:
•OUTPUT: (1) 3-pin 3.5mm detachable terminal block
•DMX output or input
•DC POWER INPUTS: (1) 2.1 x 5.5mm DC power connector and (1) 2-pin 3.5mm detachable terminal block, 7-24VDC power input
•LAN PoE: (1) 8-pin RJ45 connector, female, 10Base-T/100Base-TX Ethernet LAN port - Indicators:
•STAT: (1) LED, indicates operational status
•DIR: (1) LED, indicates DMX port is in Output mode
•LINK: (1) LED, indicates Ethernet link status
•ACT: (1) LED, indicates Ethernet activity
•Termination: (1) DIP switch (behind cover) for DMX bus termination - Power:
•DC Power: 300mA nominal (1A maximum) at 7 to 24VDC
•Power supply not included
•Power over Ethernet: IEEE 802.3at Type 1 (802.3af compatible) PoE powered device - Construction:
•Housing: Aluminum
•Mounting: 35mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45mm front panel cut-out, occupies 4 DIN module spaces (72mm)
ss_din-sacn-dmx.pdf
3069932 kb
- Data Sheet
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Avidex Industries, LLC
close
Avidex Industries, LLC
8509 154th Ave NE
Suite 100
Redmond, WA 98052
USA
(425)643-0330
www.avidex.com
Contact in regards to this product:
Crestron Electronics, Inc.
Model: DIN-SACN-DMX
Request more information from a dealer near you
close
Request more information from a dealer near you