Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
277V Clear Connect Accessory Switch
Model: CCD-RS-277
Part #: FG2606-33-WH
- Clear Connect Enabled – Lutron's patented RF Technology uses a quiet band, essentially free of interference ensuring reliable communication between system devices
- Vacancy Sensing – Automatically turn off the lights and when integrated with RMS turn off electronic appliances off when a person leaves the space
- Occupancy Sensing – Turn lights on when a person enters a room and when integrated with RMS automatically turns on electronic appliances in the room
- Simple Web Configuration – Browse to the NetLinx® Clear Connect Gateway URL to quickly setup the Clear Connect Switch
Compare
Project List
Product Info
Tech Specs
OVERVIEW
The Lutron Clear Connect CCD-RS-277-WH is a 277V Accessory Switch that is used with CCD-8S-WH Clear Connect 120/277V Switches. The Switch when added to a Clear Connect System provides light control to virtually any location, without pulling wires.
The Lutron Clear Connect CCD-RS-277-WH is a 277V Accessory Switch that is used with CCD-8S-WH Clear Connect 120/277V Switches. The Switch when added to a Clear Connect System provides light control to virtually any location, without pulling wires.
- Clear Connect Enabled – Lutron's patented RF Technology uses a quiet band, essentially free of interference ensuring reliable communication between system devices
- Vacancy Sensing – Automatically turn off the lights and when integrated with RMS turn off electronic appliances off when a person leaves the space
- Occupancy Sensing – Turn lights on when a person enters a room and when integrated with RMS automatically turns on electronic appliances in the room
- Simple Web Configuration – Browse to the NetLinx® Clear Connect Gateway URL to quickly setup the Clear Connect Switch
- Warranty - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Certifications: UL, FCC
- AC Voltage: 277 Volts
- Warranty (Length/Type): 3 Years Limited
- Wattage (max capacity): 0.20 Watt
- Power:
- Power: Power: 277 V 50 / 60 Hz
- Typical Power Consumption
- Dimmer / Switch: 0.2 W
- Test conditions: load is off and nightlight mode is enabled
- Remote Dimmer / Switch: 0 W
- Test conditions: load is off
- Surge Protection: To withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits
- Power Failure: Power failure memory: should power be interrupted, the Clear Connect Gateway will return to its previous state when power is restored
- Environmental:
- Operating Humidity: 0 to 90%, Non-condensing
- Indoor use only
- ESD Protection:
- To withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2
- COMMUNICATIONS:
- Dimmers and switches communicate with the system through Radio Frequency (RF) and must be located within 30 ft (9 m) of a repeater
- Remote dimmers / switches are not required to be within a specific range of a repeater. System devices operate on frequencies between 431.0 MHz and 437.0 MHz
- Installation:
- Mounting Requires a U.S. wallbox. 3 . in (89 mm) deep recommended, 2 . in (57 mm) deep minimum
- Wiring Uses conventional 3-way and 4-way wiring
- Connectors:
- 1 Ethernet port, 1 coaxial power socket
- Certifications:
- CSA , NOM, IC, COFETEL
Request Quote
Suggested Products
by
Crestron Electronics, Inc.
by
Crestron Electronics, Inc.
by
Crestron Electronics, Inc.
Thank you!
Someone will be in touch with you shortly.
Contact Avidex Industries, LLC
close
Avidex Industries, LLC
8509 154th Ave NE
Suite 100
Redmond, WA 98052
USA
(425)643-0330
www.avidex.com
Contact in regards to this product:
AMX
Model: CCD-RS-277
Request more information from a dealer near you
close
Request more information from a dealer near you