Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
120V Clear Connect Accessory Dimmer
Model: CCD-RD
Part #: FG2606-31-WH
- Clear Connect Enabled–Lutron's patented RF Technology uses a quiet band, essentially free of interference ensuring reliable communication between system devices
- Perfect Way to Add Light Control–Easily integrates with existing electrical infrastructures – simply replace the light switch
- Simple Web Configuration–Browse to the NetLinx® Clear Connect Gateway URL to quickly setup the Clear Connect Enabled dimmer
Compare
Project List
Product Info
Tech Specs
OVERVIEW
The Lutron Clear Connect CCD-RD is a 120V Accessory Dimmer that is used with CCD-6D-WH Clear Connect 600W Incandescent/MLV Dimmers. The Dimmer when added to a Clear Connect System provides light control to virtually any location, without pulling wires.
The Lutron Clear Connect CCD-RD is a 120V Accessory Dimmer that is used with CCD-6D-WH Clear Connect 600W Incandescent/MLV Dimmers. The Dimmer when added to a Clear Connect System provides light control to virtually any location, without pulling wires.
- Clear Connect Enabled–Lutron's patented RF Technology uses a quiet band, essentially free of interference ensuring reliable communication between system devices
- Perfect Way to Add Light Control–Easily integrates with existing electrical infrastructures – simply replace the light switch
- Simple Web Configuration–Browse to the NetLinx® Clear Connect Gateway URL to quickly setup the Clear Connect Enabled dimmer
- Warranty - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Certifications: UL, FCC
- AC Voltage: 120 Volts
- Warranty (Length/Type): 3 Years Limited
- Wattage (max capacity): 0.20 Watt
- Power:
- Power: 120 V 50 / 60 Hz
- Typical Power Consumption
- Dimmer / Switch: 0.2 W
- Test conditions: load is off and nightlight mode is enabled
- Remote Dimmer / Switch: 0 W
- Test conditions: load is off
- Surge Protection: To withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits
- Power Failure: Power failure memory: should power be interrupted, the Clear Connect Gateway will return to its previous state when power is restored
- Environmental:
- Operating Humidity: 0 to 90%, Non-condensing
- Indoor use only
- ESD Protection:
- To withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2
- COMMUNICATIONS:
- Dimmers and switches communicate with the system through Radio Frequency (RF) and must be located within 30 ft (9 m) of a repeater
- Remote dimmers / switches are not required to be within a specific range of a repeater. System devices operate on frequencies between 431.0 MHz and 437.0 MHz
- Installation:
- Mounting Requires a U.S. wallbox. 3 . in (89 mm) deep recommended, 2 . in (57 mm) deep minimum
- Wiring Uses conventional 3-way and 4-way wiring
- Certifications:
- CSA , NOM, IC, COFETEL
Request Quote
Suggested Products
by
Crestron Electronics, Inc.
by
Crestron Electronics, Inc.
Thank you!
Someone will be in touch with you shortly.
Contact Avidex Industries, LLC
close
Avidex Industries, LLC
8509 154th Ave NE
Suite 100
Redmond, WA 98052
USA
(425)643-0330
www.avidex.com
Contact in regards to this product:
AMX
Model: CCD-RD
Request more information from a dealer near you
close
Request more information from a dealer near you