Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Line Level Compressor/Limiter
Series:
Model: ST-CL2
- Positive Audio Level Protection
- Smooth Inaudible Gain Reduction
- Tight Audio Peak Control
- Very Low Noise Compressor
- Multi Stage Incremental Gain Reduction
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
Accessories
The ST-CL2 is a high performance compressor/limiter designed to maintain a constant average output level and effective peak control over a wide range of input levels. The input and output are line level and each may be wired balanced or unbalanced. Trimmers provide adjustment for all usual professional and consumer audio input and output levels. Internal detectors feed three timing circuits. The threshold level and slope of each timing circuit are incremented to respond sequentially to signals of varying amplitude and energy levels. The ST-CL2 features a soft-knee compression threshold and compression ratio which automatically adjust to the program material. Two LED indicators cover the incremental ranges of compression, making setting of the input level quick and easy. Two ST-CL2s may be strapped together for stereo operation by connecting the coupling terminals between the two modules.
- Positive Audio Level Protection
- Smooth Inaudible Gain Reduction
- Tight Audio Peak Control
- Very Low Noise Compressor
- Multi Stage Incremental Gain Reduction
- Fully Automatic Operation
- Superb Performance with Minimal Setup
- RDL SupplyFlex Power Input Configuration
- Operating Temperature (Maximum): 131 F
- Operating Temperature (Minimum): 32 F
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 10 Hz
- Minimum Frequency Response (Bandwidth): 0.01 kHz
- Maximum Input Level (dBu): 4 dBu
- Shipping Weight: 0.22 lbs
- Inputs: 10 k ohm Balanced
- Input Signal Range: -10 to +4 dBu
- Outputs: 150 ohm Balanced
- Output Signal Range: OFF to +8 dBu adjustable
- Noise below +4 dBu output: less than 78 dB
- CMRR: greater than 60 dB
- Attack Time: 500 ms
- Release Time: 500 ms
- Compression Ratio: 1.5:1 to 10: 1
- Peak Limiter: INF:1
- Interconnection: Stereo COUPLE interconnection provided
- Indicators (2): Yellow LED for NORMAL Compression, Red LED for HEAVY Compression
- Power Requirement: 24 to 33 VDC @ 50 mA
Datasheet for Compressor/Limiter - Line Level
553082 kb
- Other
Project List
DRA-35S
STICK-ON DIN Rail Adapter
DRA-35S6
STICK-ON DIN Rail Adapter
DTB
STICK-ON® Series Detachable Terminal Block
MB-1
Mounting Kit - RU, ST and TX Series
MB-3
Kit to Mount ST, TX Series Modules on FP Panel
MSR-1
Snap Rail Adapter - STICK-ON Series
PM-1T
Pole Mount Tray
SMK-12
STICK-ON Mounting Plate
SR-10
STICK-ON Series Mounting Rack - 10 Modules
SR-12A
STICK-ON Series 19" Mounting Rack - 12 modules
SR-4
STICK-ON Series Mounting Rack - 7 Modules max.
STR-19A
STICK-ON Series Racking System - 12 Modules
STR-19B
Hinged 19-inch Rack Mount Panel
STICK-ON DIN Rail Adapter
DRA-35S6
STICK-ON DIN Rail Adapter
DTB
STICK-ON® Series Detachable Terminal Block
MB-1
Mounting Kit - RU, ST and TX Series
MB-3
Kit to Mount ST, TX Series Modules on FP Panel
MSR-1
Snap Rail Adapter - STICK-ON Series
PM-1T
Pole Mount Tray
SMK-12
STICK-ON Mounting Plate
SR-10
STICK-ON Series Mounting Rack - 10 Modules
SR-12A
STICK-ON Series 19" Mounting Rack - 12 modules
SR-4
STICK-ON Series Mounting Rack - 7 Modules max.
STR-19A
STICK-ON Series Racking System - 12 Modules
STR-19B
Hinged 19-inch Rack Mount Panel
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Avidex Industries, LLC
close
Avidex Industries, LLC
8509 154th Ave NE
Suite 100
Redmond, WA 98052
USA
(425)643-0330
www.avidex.com
Contact in regards to this product:
Radio Design Labs
Model: ST-CL2
Request more information from a dealer near you
close
Request more information from a dealer near you