Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
IR Plus Secure
Model: IR SY12
- System Includes:
- IR M1
- (2) IR E4
- IDP 008
- IR RX20
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
IR Plus Secure - Includes: (1) IR M1 IR + Infrared Modulator / Wi-Fi Server, (2) IR E4 IR + Infrared emitters, (1) MLB 003 metal linking bar, (5) IR RX20 receivers, (2) NKL 001 neckloops, (1) CHG 520 5-bay charger and (1) IDP 008 ADA wall plaque. Replaces WIR SYS 3.
- System Includes:
- IR M1
- (2) IR E4
- IDP 008
- IR RX20
- CHG 502
- (2) NKL 001
- (4) BAT 026-2
- MLB 003
- (2) BKT 024
- ROHS Compliant - Yes
- Warranty - Yes
- Wireless Receiver Transmission - IR
- Spec Sheet available - Yes
- Depth: 8.20 in
- Height: 1.75 in
- Width: 19 in
- Product Weight: 5.29 lbs
- Active Power: 36 Watt
- Color: Black
- Warranty (Length/Type): 2 Years
- Certifications: CE, FCC, RCM, WEEE, CB Scheme, ISED, VCCI
- Minimum Frequency Response (Bandwidth): 40 Hz
- Minimum Frequency Response (Bandwidth): 0.04 kHz
- Maximum Frequency Response (Bandwidth): 16000 Hz
- Maximum Frequency Response (Bandwidth): 16 kHz
- Signal to Noise Ratio: 67 dB
- Number of Receivers Supplied: 1
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): 32 F
- AC Voltage (Minimum): 110 Volts
- AC Voltage (Maximum): 240 Volts
- IR E4:
•Dimensions: 7.5” (W) x 1.4” (H) x 3.6” (D) (19.1 cm x 3.6 cm x 9.1 cm)
•Weight: 0.8 lb (362 g)
•Color: Black
•Power: 48 VDC supplied by IR M1 via CAT 5e cable.
•Coverage Area: Up to 18,000 square feet (1,670 sq. m) in single channel mode
•Connectivity: +48VDC Power, RS-485 communication, and Baseband signals for IR trasmission are all provided via a single CAT5e cable inserted into an RJ-45 jack from the IR M1.
•Operating requirements:0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere
•Approvals: CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI
•Warranty: 2 years on Emitter; 90 days on accessories - IR M1:
•Rack Mount: Single Rack Unit
•Power Supply: International Desktop Supply
•Output: +48VDC, 0.75A center-positive
•Power Switch: Rocker switch with LED
•Modulation: FM Wideband, +50kHz deviation, 50uS pre-emphasis
•Carrier Frequency: Selectable, 2.3/2.8 or 3.3/3.8MHz
•Total Harmonic Distortion:Less than 2%, electrical response
•Audio Processor Functions: DSP based; Compression 1:1, 1.5:1, or 2:1; High-pass and low-pass filter frequency control
•Auto Carrier Shut-Off: Adjustable timer shuts off carrier when no audio is present. Adjustable through webpage.
•Infrared Test LED: Dual IR LED for receiver testing, monitoring, and audio signal testing.
•Audio Input: (2x) Combination 3-pin XLR, 1/4” (TRS) jack for balanced or unbalanced line level, or balanced or unbalanced microphone with selectable phantom power
•Internal Test Tone: 400 Hz internal test tone selectable as audio input source for setup and diagnostics
•Remote Configuration: Available through embedded website
•Headphone Output: (2) 1/4" headphone jacks on front panel for monitoring CH A and CH B audio inputs
•Emitter Output Jack: Four RJ-45 ports for CAT5e cables; provides +48VDC Power, RS-485 communication and Baseband signals for IR transmission
MCAT-277-IR-M1.pdf
311795 kb
- Data Sheet
Project List
IRPlusFlyer_5_25_21.pdf
755961 kb
- Brochure
Project List
MAN-273_C-IR-M1.pdf
1552472 kb
- Instructions
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Avidex Industries, LLC
close
Avidex Industries, LLC
8509 154th Ave NE
Suite 100
Redmond, WA 98052
USA
(425)643-0330
www.avidex.com
Contact in regards to this product:
Williams AV
Model: IR SY12
Request more information from a dealer near you
close
Request more information from a dealer near you