Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Ultracompact Subwoofer, Intelligent DC
Series: LF
Model: UMS-1XP
- External DC power affords the flexibility of lengthy cable runs without conduits
- Extremely compact cabinet with powerful, extended low-frequency response
- Linear driver excursion ensures exceptionally clean bass responses with very low distortion
- Ideal companion to the externally powered UPM-1XP and UPJunior-XP ultracompact loudspeakers
- Applications: Theatrical sound reinforcement, Portable and installed AV systems, Houses of worship, Mix suites
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
The externally powered UMS-1XP is an extremely compact subwoofer that provides powerful low-frequency extension. The UMS-1XP offers the same 127 dB peak SPL output and 25 Hz to 160 Hz operating range as the UMS-1P while also offering all the advantages of external DC power, making it an ideal solution for installations where AC cabling is not feasible. Powering the UMS-1XP from an external MPS power supply affords the flexibility of lengthy cable runs without conduits. The UMS-1XP is a logical companion to any of Meyer Sound's externally powered loudspeakers. For installations requiring even greater low-frequency headroom, multiple UMS-1XPs can be stacked. A tuned, bass-reflex enclosure houses the UMS-1XP's two 10-inch cone drivers. The drivers are powered by two channels of Class-D amplification yielding a total peak power output of 450 watts. Each driver channel includes a limiter that prevents overexcursion and regulates voice coil temperatures, ensuring smooth limiting characteristics and high output levels across the subwoofer's entire frequency range. The UMS-1XP receives DC power and balanced audio from a single loudspeaker connector, available as a Phoenix 5-pin male, sealed SwitchCraft EN3 5-pin male, or sealed ECO-M 7-pin male. The use of composite multiconductor cables (such as Belden 1502 or equivalent) allows a single cable to carry both DC power and balanced audio to the UMS-1XP. The loudspeaker's amplifier and signal-processing circuits store DC power and tolerate voltage drops, thereby accommodating light-gauge cables and lengthy cable runs. UMS-1XP subwoofer systems require an MPS-488HP external power supply. The rack mount multichannel power supply can deliver DC power and balanced audio to eight UMS-1XP subwoofers at cable lengths up to 150 feet with just 1 dB of loss in peak SPL using 18 AWG wire. Longer cable runs are possible with heavier wire gauges. The UMS-1XP's durable enclosure is constructed of premium birch plywood and coated with a black- textured, hard-shell finish. A powder-coated, hex- stamped grille with black mesh protects the unit's drivers. The cabinet top includes a 1 3/8-inch receptacle for pole-mounting the UPM-1XP or UPJunior-XP with the optional MPS-UMS stand. The UMS-1XP is also available from the factory with threaded end plates and the UMS-SM U-bracket for single-mount configurations. Custom color finishes are also available for installations with specific cosmetic requirements.
- External DC power affords the flexibility of lengthy cable runs without conduits
- Extremely compact cabinet with powerful, extended low-frequency response
- Linear driver excursion ensures exceptionally clean bass responses with very low distortion
- Ideal companion to the externally powered UPM-1XP and UPJunior-XP ultracompact loudspeakers
- Applications: Theatrical sound reinforcement, Portable and installed AV systems, Houses of worship, Mix suites
- Spec Sheet available - Yes
- Speaker Diameter (Driver): 10 in
- Maximum Frequency Response (Bandwidth): 160 Hz
- Maximum Frequency Response (Bandwidth): 0.16 kHz
- Minimum Frequency Response (Bandwidth): 25 Hz
- Minimum Frequency Response (Bandwidth): 0.03 kHz
- Finish: Black Textured
- Impedance: 10000 ohm
- Maximum SPL (Sound Pressure Level): 127 dB
- Power Handling: 450 Watt
- Sensitivity: 0 dBV
- DC Voltage: 48 Volts
- Depth: 17.51 in
- Height: 16.30 in
- Width: 22.75 in
- Product Weight: 58 lbs
- Color: Black
- Coverage: 360° single unit; varies for multiple units
- Transducers: Two 10” cone drivers
- Amplifier: Two channels (Class-D)
- Amplifier Output Power: 450 W total
- Amplifier Load Capacity: 4 ohm (both channels)
UMS-1P
- UltraCompact Subwoofer
UP-4XP
- UltraCompact Loudspeaker, 48VDC
UPA-1P
- Compact Wide Coverage Loudspeaker
UPA-2P
- Compact Narrow Coverage Loudspeaker
UPJ-1P
- Compact VariO Loudspeaker
UPJunior
- 2-Channel UltraCompact VariO Loudspeaker, 300W
UPJunior-XP
- Ultracompact VariO Loudspeaker, IntelligentDC
UPM-1P
- 2-Channel UltraCompact Wide Coverage Loudspeaker, 350W
UPM-1XP
- Ultracompact Wide-Coverage Loudspeaker, IntelligentDC
UPM-2P
- UltraCompact Narrow Coverage
UPQ-1P
- Wide Coverage Loudspeaker
UPQ-2P
- Narrow Coverage Loudspeaker
USW-1P
- Compact Subwoofer
ums-1xp_ppi.pdf
321 kb
- Data Sheet
Project List
Schedule - Subwoofer-Ultra_Series-Meyer_Sound-UltraCompact.rvt
3948 kb
- BIM Objects
Project List
Subwoofer-Ultra_Series-Meyer_Sound-UltraCompact.rfa
580 kb
- BIM Objects
Project List
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Avidex Industries, LLC
close
Avidex Industries, LLC
8509 154th Ave NE
Suite 100
Redmond, WA 98052
USA
(425)643-0330
www.avidex.com
Contact in regards to this product:
Meyer Sound Laboratories, Inc.
Model: UMS-1XP
Request more information from a dealer near you
close
Request more information from a dealer near you