VGA/HDMI/MHL Auto-switching Wallplate with HDBaseT
Model: UHBX-SW3-WP
- 3 inputs handle VGA, Component, HDMI (or DVI), and even MHL
- Supports phone charging feature if MHL source is detected
- VGA input is scaled to 1080p or user specified output resolution to ensure proper image
- Supports all HDMI resolutions including 4K (UHD)
- Can scale HDMI output resolution
The VGA input also accepts YPbPr Component video. The sender can manually or automatically switch between the various inputs and extends the video using HDBaseT™ standard. To control the power on/off function of the remote display, the wall-plate can generate RS232, and IR control signals which are extended using the same Cat6 cable. Virtually all VGA and HDMI resolutions are supported including 4K (UHD). 4K video can be extended to 330 ft (100m) while 1080p signals can go as far as 500 ft (150m). The wall-plate is powered through the same cable from the receiver using PoH (Power-over-HDBaseT) standard, making installations as simple as possible. The UHBX-R-PSE receiver includes a small power supply and provides HDMI, RS-232 and IR outputs.
To ensure a proper image on the display, the wall-plate's VGA input is scaled to 1080p. This eliminates compatibility issues with various notebook or PC VGA formats that may not be displayable on an HDMI TV if not scaled to a standard HDTV resolution such as 1080p. The user can also configure the unit to pass-through 3.5 mm audio input from an MP3 audio player independent of the VGA signal.
The system can manually or automatically control the power on/off function of the remote display. If a video is detected on the input, in automatic power mode, the wall-plate will issue the desired ON command, and if there is no video, it can issue an OFF command after a programmed delay. The power commands can be RS232, IR, or CEC based on the user's needs. To select the control method and to enter the commands, a USB port is provided on the wall-plate for programming using Hall Research's free Windows® GUI software. In addition, the wall-plate features an IR detector that can extend IR signal to the remote receiver. In this way, an IR remote can be pointed to the wall-plate and its signal will be extended to the TV.
The UHBX-SW3-WP complies fully with HDBaseT Alliance's design specifications and may be connected to displays or projectors with HDBaseT inputs without the external receiver. In that case, a PoH compliant power inserter would be needed to power the wall-plate.
The UHBX-SW3-WP is a culmination of Hall Research's expertise in high-definition analog and digital video scaling and extension technologies and is fully designed and manufactured in the USA.
- 3 inputs handle VGA, Component, HDMI (or DVI), and even MHL
- Supports phone charging feature if MHL source is detected
- VGA input is scaled to 1080p or user specified output resolution to ensure proper image
- Supports all HDMI resolutions including 4K (UHD)
- Can scale HDMI output resolution
- Uses only one Cat6
- Distance to 500 ft (150m) at 1080p, or 330 ft (100m) at 4K resolution
- Manual or automatic input selection
- IR Extension
- Can issue its own RS-232, IR, or CEC command to turn display On or Off
- Display power control can be manual or automatic
- Wall plate does not require separate power supply, powered using PoH through the same Cat6 cable
- USB port for configuration (including display power on/off control methodology)
- Gang Number - Two
- Plate Types - Plates With Connectors (Built In)
- Warranty - Yes
- HDBaseT - Yes
- Active Power: 15 Watt
- Current Draw: 3 Amps
- DC Voltage: 5 Volts
- Regulatory Compliance: HDCP
- Video Inputs: 2x HDMI (1 MHL), 1x HD15 (VGA or YPbPr)
- Video Connectors: HDMI Female, HD15 Female, RJ45 for HDBaseT output
- Input Standards: HDMI 1.4, MHL 2.0, DVI 1.0, VESA VGA, NTSC 3.58
- Video Bandwidth : HDMI 25MHz-300MHz TMDS Clock, VGA 350MHz, YPbPr
- Supported Resolutions: HDMI 480p to 4K UHD, MHL to 1080p, VGA 640x480 to 1920x1080, YPbPr
- Audio Inputs: Unbalanced stereo audio for VGA input (Line Level)
- Audio Connectors: 3.5mm Mini-stereo, Female
- Frequency Response : 20Hz to 20KHz
- Control::
- Mini-USB (GUI setup)
- Programmable push buttons (Input selection and Power toggle)
- RS-232 transmit
- IR transmit (pass-through or generated)
- CEC control (future)
- Auto-switching, auto-power on/off available
- External keypad ("Aux CTRL") port
- POWER SUPPLY: Device is PoH 'PD' (Powered Device); receives power from compatible 'PSE' (Power Sourcing Equipment) Receiver
- Mounting::
- Clearance: 3.7" Horizontal x 2.8" Vertical Opening
- Supported VGA Resolutions::
- Detailed Timings
- 1920 x 1080 60hz
- 1360 x 768 60hz
- 1280 x 720 60hz
- Established Timings
- 640 x 480 60hz
- 800 x 600 60hz
- 1024 x 768 60hz
- Standard Timings
- 1280 x 720 16:9
- 1280 x 1024 5:4
- 1280 x 960 4:3
- 1280 x 800 16:10
- 1600 x 1200 4:3
- 1680 x 1050 16:10
- 1440 x 900 16:10
- Detailed Timings
- Warranty (Length/Type): 2 Years
Suggested Products
Avidex Industries, LLC
8509 154th Ave NE
Suite 100
Redmond, WA 98052
USA
(425)643-0330
www.avidex.com